5 Easy Steps to Attach Dualsense Edge Grip Back

Attaching the DualSense Edge Grip Back is a crucial step in setting up your PlayStation controller for optimal gaming performance. This sleek and ergonomic accessory offers an enhanced grip and comfort, allowing you to immerse yourself fully in your favorite titles. Whether you’re a seasoned gamer or a newcomer to the world of PlayStation, this guide will provide you with clear and concise instructions on how to attach the DualSense Edge Grip Back, ensuring a seamless and enjoyable gaming experience.

Before embarking on the installation process, it’s essential to gather the necessary materials. You’ll need the DualSense Edge Grip Back, the controller itself, and a screwdriver (not included). Once you have these items ready, find a well-lit and comfortable workspace to begin the attachment process. With a gentle and steady hand, align the Grip Back with the bottom of the controller, ensuring that the directional arrows on the Grip Back match the corresponding arrows on the controller. Once aligned, apply gentle pressure to secure the Grip Back in place.

Next, secure the Grip Back using the included screws. Locate the two screw holes on the bottom of the controller and carefully insert the screws into each hole. Avoid overtightening the screws, as this could damage the controller or Grip Back. Once the screws are snug, the DualSense Edge Grip Back will be securely attached to your controller, ready to elevate your gaming experience to new heights. With its ergonomic design and enhanced grip, you’ll enjoy increased comfort and control during even the most intense gaming sessions.

Removing the Original Grips

To remove the original grips, you’ll need to carefully follow these steps:

Prepare Your Workspace: Before you begin, prepare your workspace to prevent accidental damage to the controller. Place the controller on a clean, soft surface, such as a microfiber cloth.
Identify the Grip Screw: Locate the small screw that secures the grip to the controller handle. The screw is usually positioned on the inner edge of the grip, near the controller’s body.
Remove the Grip Screw: Using a compatible screwdriver, carefully unscrew and remove the grip screw. Be gentle to avoid damaging the screw or stripping the screw hole.
Separate the Grip from the Handle: Once the screw is removed, gently separate the grip from the controller handle. Start by gently pulling the grip towards the battery compartment. Use a plastic pry tool or a spudger if necessary to assist in the separation.
Repeat for the Other Grip: Follow the same steps to remove the grip on the opposite side of the controller.

Identifying the Edge Grips

The DualSense Edge grips come in two distinct parts: the front and the back. The front grips are the larger and more visible parts that wrap around the front of the controller. The back grips are smaller and attach to the back of the controller below the triggers. Both sets of grips are made of a textured rubber material that provides a comfortable and secure grip.

To identify the edge grips, you will need to look for the small, rectangular slots on the back of the controller. These slots are located on either side of the trigger buttons, and they are where the back grips attach.

Once you have identified the slots, you can insert the back grips into them. Make sure that the grips are inserted all the way into the slots, so that they are secure. Once the grips are inserted, you can press down on them to snap them into place.

The following table provides a summary of the steps involved in identifying the edge grips:

Step	Action
1	Locate the small, rectangular slots on the back of the controller.
2	Insert the back grips into the slots.
3	Press down on the grips to snap them into place.

Aligning the Edge Grips

Before attaching the Edge Grips, ensure their alignment. They are designed to fit only in specific orientations for proper functioning and comfort. The grips have a small indentation on their inner side, which should line up with the corresponding ridge on the controller. If they are not aligned correctly, you may experience discomfort or reduced performance.

To align the Edge Grips, follow these steps:

Hold the controller in your preferred grip position.
Orient the Edge Grip with its indentation facing inward, towards the controller.
Gently slide the Grip onto the controller, ensuring that the indentation aligns with the ridge.

Left Grip Right Grip

Once aligned, the Edge Grips should fit snugly and securely without any gaps or misalignments. This ensures optimal grip, comfort, and responsiveness during gameplay.

Gently Pressing the Grips into Place

Once you have aligned the grips with the controller, apply gentle pressure to the edges of the grips, ensuring proper alignment with the mounting points on the controller. Utilize both hands to distribute pressure evenly across both grips.

Tips for Ensuring Alignment:

Visual Guide	Tactile Feedback
Look for a snug fit between the grips and the controller’s mounting points. There should be no visible gaps or misalignments.	You will feel a slight “click” when the grips snap into place securely.

Additional Precautions:

Avoid excessive force when pressing the grips into place. This could damage the controller or the grips themselves.
If you encounter any resistance or difficulty while pressing the grips, recheck their alignment and try again.
Once the grips are firmly attached, ensure they are secure by tugging gently on them to verify their stability.

Securing the Grips with Screws

Once the grips are in place, it’s time to secure them with the included screws. Here’s a step-by-step guide:

1. Identify the Screw Holes

Locate the two screw holes on the back of each grip. These holes align with the corresponding holes on the controller’s body.

2. Align the Grip

Position the grip over the screw holes, ensuring it is properly aligned. The PlayStation logo on the grip should be facing the correct direction.

3. Insert the Screws

Take the provided screws and carefully insert them into the screw holes. Turn the screws clockwise using a small screwdriver until they are snug.

4. Repeat for the Other Grip

Follow the same steps to secure the other grip to the opposite side of the controller.

5. Ensure Proper Tightening

Once both grips are secured, check that they are properly tightened. Ensure they are firmly attached to the controller without any looseness or excessive force. Refer to the table below for the recommended torque specifications:

Screw Size	Recommended Torque (in-lbs)
M3	10-15
M4	15-20

Note: Do not overtighten the screws, as this can damage the controller.

Replacing the Back Panel

Once the grips are removed, you need to replace the back panel.

Step 5: Flip the Edge over and locate the two screws on the back. These screws hold the back panel in place, so you need to remove them using a Phillips #00 screwdriver.

Step 6: Once the screws are removed, you can carefully lift the back panel away from the Edge. Be gentle, as the back panel is connected to the Edge by a ribbon cable. Note: Do not completely remove the back panel. Leave the ribbon cable attached.

Step 7: With the back panel lifted, you will see the battery compartment as well as the location where the grips attach to the controller. Ensure the battery is disconnected.

Step 8: Now, take the new back panel and align it with the Edge. Ensure the ribbon cable is correctly inserted into its slot on the new back panel.

Step 9: Gently press down on the back panel until it is securely in place.

Step 10: Replace the two screws that you removed in step 5, securing the back panel.

Checking the Edge Grip Functionality

Before attaching the DualSense Edge Grip back, it’s crucial to ensure its proper functionality. Follow these steps to check its operation:

1. Insert the Grip Module

Align the Grip Module with the corresponding slot on the back of the controller and slide it in until it clicks into place.

2. Connect the Back Buttons

Insert the Back Buttons into their designated slots on the Grip Module. Make sure they fit snugly and are oriented correctly.

3. Check Button Response

Press and hold the Back Buttons to verify their responsiveness and sensitivity. They should register input without any delays or double-triggers.

4. Adjust the Toe Triggers

Slide the Toe Triggers forward or backward to find the most comfortable and ergonomic position for your hands.

5. Test the Grip

Hold the controller with the attached Grip Module to assess its comfort and fit. The Grip should provide a secure and comfortable grip.

6. Verify the Trigger Stop

Flip the Trigger Stop switch located on the Grip Module to limit the travel distance of the L2/R2 triggers. This feature can enhance precision during gaming.

7. Fine-Tune Buttons and Triggers

Use the Fn button on the controller to access the Game Settings menu. Here, you can adjust the sensitivity, dead zones, and other settings for the Back Buttons, Toe Triggers, and default buttons. This allows you to customize the controller’s functionality to your preferences and gaming style.

Customizing Grip Sensitivity

The DualSense Edge controller’s customizable grip sensitivity allows you to fine-tune the trigger and back button input to match your gameplay preferences. This advanced feature provides unparalleled precision and control over your actions, empowering you to optimize your gaming experience for each title you play.

To customize the grip sensitivity, follow these steps:

1. Open the PS5 Control Center by pressing the PlayStation button on the controller.

2. Navigate to “Accessories” and select the “DualSense Edge” controller.

3. Choose “Trigger Sensitivity” or “Back Button Sensitivity” from the options menu.

4. Use the slider to adjust the sensitivity of the triggers or back buttons according to your desired level of responsiveness.

Here’s a table summarizing the available sensitivity settings:

Sensitivity Level	Description
0	Lowest sensitivity (triggers or buttons require the most force to activate)
1	Slightly higher sensitivity (less force required to activate)
2	Moderate sensitivity (balanced between responsiveness and control)
3	Higher sensitivity (triggers or buttons activate more easily)
4	Highest sensitivity (triggers or buttons trigger with minimal force)

Experiment with different sensitivity levels to find the optimal settings for your preferred gameplay style. Fine-tuning the grip sensitivity can significantly enhance your accuracy, reaction times, and overall gaming performance.

Programming Profile Buttons

The DualSense Edge Grip Back panel features four programmable buttons, which allow you to customize your control layout for different games or scenarios. Here’s how to program these buttons:

1. Connect your DualSense Edge Wireless Controller to your PlayStation 5 console or PC.

2. Open the PlayStation 5’s Settings menu and select “Accessories” > “DualSense Edge Wireless Controller.” On PC, open the PlayStation app and navigate to “Settings” > “DualSense Edge Wireless Controller.”

3. Select the “Profile” tab.

4. Choose the profile you want to modify or create a new one.

5. Select the “Button Mapping” tab.

6. Select the button you want to program.

7. Press the button on your controller that you want to assign to the selected button.

8. Repeat steps 6-7 for any other buttons you want to program.

9. You can also adjust the following advanced settings for each button:

Setting	Description
Button Sensitivity	Adjusts the minimum and maximum input threshold, allowing you to fine-tune the responsiveness of the button.
Button Deadzone	Creates a “dead” zone around the center of the button’s range, preventing accidental inputs.
Button Trigger	Determines whether the button requires a single press or a held press to activate.
Button Behavior	Allows you to assign multiple functions to a single button, such as combining a jump with a heavy attack.
Toggle Mode	Makes the button function as a toggle switch, staying activated until pressed again.

10. Once you have finished programming the buttons, select “Save” to save your profile.

Troubleshooting Grip Issues

1. Check the Grip’s Alignment

Ensure the grips are aligned properly with the back of the controller. If they are misaligned, they may not lock into place securely.

2. Clean the Contact Points

Use a soft, dry cloth to clean any dirt or debris from the contact points on both the grips and the controller.

3. Apply Pressure When Inserting

When inserting the grips, apply firm pressure to ensure they click into place securely.

4. Double-Check the Connection

Once inserted, try gently wiggling the grips to confirm they are firmly attached.

5. Inspect for Damage

Check both the grips and the controller for any visible damage that may prevent proper attachment.

6. Reset the Controller

Turn off the controller and then turn it back on. This may resolve any software glitches that may be affecting the grip connection.

7. Use a Different Grip Attachment

If you have other compatible grip attachments, try using them to see if the issue persists.

8. Contact Customer Support

If all else fails, reach out to the controller’s manufacturer for assistance with troubleshooting.

9. Update Firmware

Check if there are any firmware updates available for the controller and grips. Installing them may resolve the issue.

10. Detailed Grip Insertion Guide

Step	Instructions
1	Remove the existing grips (if any).
2	Clean the contact points on both the controller and grips using a soft, dry cloth.
3	Align the grips with the corresponding slots on the back of the controller, ensuring they are facing the correct direction.
4	Apply firm pressure to both grips simultaneously until they click into place.
5	Gently wiggle the grips to confirm they are securely attached.

How to Attach DualSense Edge Grip Back

To attach the DualSense Edge Grip Back, follow these steps:

Make sure that the DualSense controller is turned off and disconnected from any devices.
Align the Grip Back with the back of the controller, making sure that the buttons and ports are lined up correctly.
Press down on the Grip Back until it clicks into place.
Turn on the DualSense controller to verify that the Grip Back is attached correctly.