11. How To Build The 11th Doctors 2nd Tardis Console

11. How To Build The 11th Doctors 2nd Tardis Console

by

11. How To Build The 11th Doctors 2nd Tardis Console

Matt Smith’s reign as the Eleventh Doctor brought about many changes to the TARDIS, including a brand-new console room. This console was more complex and visually stunning than any of its predecessors, and it quickly became a fan favorite. If you’re a fan of the Eleventh Doctor’s TARDIS console, you’ll be excited to know that it’s possible to build your own. With a little time and effort, you can create a replica that’s just as impressive as the original.

The first step is to gather your materials. You’ll need a variety of materials, including wood, plastic, metal, and electronics. You’ll also need some basic tools, such as a saw, a drill, and a soldering iron. Once you have your materials, you can begin assembling the console. The console is made up of several different parts, including the main body, the control panel, and the light-up panels. The main body is made of wood, and the control panel is made of plastic. The light-up panels are made of acrylic.

Once you have assembled the console, you can begin wiring it. The wiring is relatively simple, but it’s important to follow the instructions carefully. Once the console is wired, you can test it to make sure it works properly. If everything is working correctly, you can now enjoy your very own Eleventh Doctor’s TARDIS console. This is a great project for fans of Doctor Who, and it’s a great way to show off your creativity.

$title$

Selecting the Proper Materials

The first step in building the 11th Doctor’s 2nd TARDIS console is to gather the necessary materials. The most important element is a wooden box or cabinet that will serve as the base of the console. The size and shape of the box will depend on the size and design of the TARDIS you want to create. However, a good starting point is a box that is around 24 inches wide, 18 inches deep, and 12 inches high.

In addition to the wooden box, you will also need a variety of other materials, including:

  • Wood glue
  • Screws
  • Nails
  • Sandpaper
  • Paint
  • Decorative elements

    • The type of wood you use for the box is not critical, but it is important to choose a wood that is strong and durable. Pine, oak, and maple are all good choices. Once you have selected the wood, you will need to cut it to size and assemble the box. Be sure to use wood glue and screws to secure the joints.

    The next step is to sand the box smooth. This will help to remove any splinters or rough edges. Once the box is sanded, you can paint it or stain it to your desired color. You can also add decorative elements, such as trim or molding, to give the box a more finished look.

    Building the Frame

    The frame of the console is made from 12mm MDF, which is a type of medium-density fibreboard. It is a relatively inexpensive material that is easy to work with, and it is strong enough to support the weight of the console’s components.

    Cutting the MDF

    The first step is to cut the MDF to the correct size. The dimensions of the frame are as follows:

    Dimension Cut
    Width 1200mm
    Height 1000mm
    Depth 800mm

    Once the MDF has been cut to size, it needs to be assembled into a frame. The frame is assembled using wood glue and screws. The glue will help to hold the frame together, while the screws will provide additional strength.

    Assembling the Frame

    To assemble the frame, first apply a bead of wood glue to the edge of one of the MDF panels. Then, place another MDF panel on top of the first panel and align the edges. Use a screwdriver to drive screws through the panels and into the frame. Repeat this process for the remaining panels until the frame is assembled.

    Once the frame is assembled, it needs to be sanded smooth. This will help to remove any rough edges and splinters. Once the frame is sanded smooth, it is ready to be painted or stained.

    Installing the Lights

    Installing the lights in the console is a relatively easy task, but it does require some care and attention to detail. The lights are all LEDs, so they are very bright and can be easily damaged if they are not handled properly.

    The first step is to identify the location of the lights on the console. The lights are all located on the front of the console, and they are arranged in a symmetrical pattern. Once you have identified the location of the lights, you can begin to install them.

    To install the lights, you will need to use a soldering iron and some solder. The lights are all connected to the console by wires, and you will need to solder the wires to the corresponding terminals on the console. The wires are all color-coded, so it is easy to identify which wire goes to which terminal.

    Installing the Power Supply

    Once you have installed the lights, you will need to install the power supply. The power supply is a small, black box that is located on the back of the console. The power supply provides power to the lights and to the other components of the console.

    To install the power supply, you will need to connect the power supply to the console using the provided wires. The wires are all color-coded, so it is easy to identify which wire goes to which terminal.

    Wire Color Terminal
    Red +12V
    Black GND

    Creating the Control Panel

    4. Assembling the Tardis Console

    Now it’s time to assemble the TARDIS console. This is a delicate process, so take your time and be careful not to damage any of the components.

    Step 1: Attach the side panels to the base.

    Step 2: Attach the top panel to the base.

    Step 3: Install the control panel.

    Step 4: Wire the control panel.

    This is the most complex part of the assembly process, so follow the instructions carefully.

    Step 4a: Connect the wires to the LEDs.

    Step 4b: Connect the wires to the switches.

    Step 4c: Connect the wires to the resistors.

    Step 4d: Connect the wires to the power supply.

    Once you have finished wiring the control panel, you can test it to make sure it works properly.

    Step Action
    4a Connect the wires to the LEDs.
    4b Connect the wires to the switches.
    4c Connect the wires to the resistors.
    4d Connect the wires to the power supply.

    Wiring the Electronics

    5. Wiring the Control Panel

    Wiring the control panel is a complex and time-consuming process, but it is essential to ensure that all of the controls and displays function properly. Be meticulous in your work and take your time to ensure that all of the connections are secure and correct.

    Wire color Connection
    Red +5V power supply
    Black Ground
    Yellow Control signal for display 1
    Green Control signal for display 2
    Blue Control signal for display 3

    Once the control panel is wired, connect it to the main circuit board. Double-check all of the connections and power on the TARDIS. If all of the controls and displays are functioning properly, you have successfully wired the electronics.

    Assembling the Structure

    ### 6. The Dome

    The dome is perhaps the most iconic part of the TARDIS console. It is a large, translucent dome that sits atop the console and houses the time rotor. To create the dome, you will need to use clear acrylic or polycarbonate. You can either purchase a pre-made dome or make your own using a vacuum former. If you are making your own dome, you will need to create a mold first. You can do this by making a plaster cast of a spherical object, or by using a 3D printer. Once you have made the mold, you can use it to form the dome by heating the acrylic or polycarbonate and then vacuum forming it over the mold.

    Once you have formed the dome, you will need to attach it to the console. This can be done using epoxy or cyanoacrylate glue. You can also use a UV adhesive, which will create a strong and invisible bond. Once the dome is attached, you can add the time rotor. The time rotor is a small, spinning disk that sits at the top of the dome. You can create the time rotor using a small piece of wood or plastic. You will need to drill a hole in the center of the disk and insert a metal shaft. The shaft should be long enough to fit through the hole in the dome and extend a few inches below the dome. You can then attach the disk to the shaft using epoxy or cyanoacrylate glue.

    Once the time rotor is attached, you can add the dome to the console. To do this, you will need to use epoxy or cyanoacrylate glue. You can also use a UV adhesive, which will create a strong and invisible bond. Once the dome is attached, you can add the remaining details to the console, such as the buttons, switches, and dials.

    Material Quantity
    Clear acrylic or polycarbonate 1 sheet
    Plaster 1 bag
    Epoxy or cyanoacrylate glue 1 tube
    UV adhesive 1 bottle
    Small piece of wood or plastic 1
    Metal shaft 1

    Applying the Exterior Details

    Now that the central column is complete, it’s time to start adding the exterior details to the console. This includes the various panels, buttons, and other features that give the console its distinctive look.

    To create the panels, you will need to cut pieces of styrene or other thin material to the desired size and shape. Once you have the panels cut, you can glue them to the console column using cyanoacrylate glue or other strong adhesive.

    7. Adding the Buttons and Knobs

    The buttons and knobs are an important part of the console’s design and add a lot of visual interest. To create the buttons, you can use small pieces of styrene or other material that has been cut into a circular shape. Once you have the buttons cut, you can glue them to the panels using cyanoacrylate glue or other strong adhesive.

    Button Type Dimensions
    Round 1/4″ diameter
    Square 1/4″ x 1/4″
    Rectangle 1/4″ x 1/2″

    To create the knobs, you can use small pieces of wood or metal that has been turned on a lathe. Once you have the knobs turned, you can glue them to the panels using cyanoacrylate glue or other strong adhesive.

    Installing the Sound Effects

    The next step is to install the sound effects. You can find a variety of sound effects online, such as on YouTube or SoundCloud. Once you have downloaded the sound effects, you will need to import them into your sound editing software.

    Once your sound effects are imported, you will need to create a new track in your sound editing software. This is where you’ll place the sound effects so you can play them back.

    To add a sound effect to the track, simply drag and drop it from the sound effects library into the track. You can then adjust the volume, panning, and other settings for the sound effect.

    You can use the sound effects to create a variety of different sounds, such as footsteps, explosions, and spaceship engines. You can also use them to create ambient noise, such as wind, rain, and thunder.

    Once you have added the sound effects to the track, you can preview it to make sure it sounds the way you want it to sound. If you’re not happy with the sound, you can adjust the settings for the sound effects or add additional sound effects.

    Once you’re happy with the sound, you can export the track as a WAV or MP3 file. You can then add the sound effects to your game by importing them into your game audio engine.

    Adding Interactivity

    You can also add interactivity to your sound effects by using the built-in automation features in your sound editing software. This will allow you to control the volume, panning, and other settings for the sound effects over time.

    Adding the Finishing Touches

    With the main structure of the console complete, it’s time to add the finishing touches that will bring it to life. Let’s focus on the intricate details of the console’s number 9 screen:

    Adding the Number 9 Screen

    1. Create the Number 9 Base: Cut a 5.5 cm x 3.5 cm rectangular piece of foamboard. This will form the base of the number 9 screen.
    2. Score and Bend: Score the foamboard along the shorter edges, 2 cm from the bottom and top. Bend the foamboard along the score lines to create the base shape of the number 9.
    3. Add Detail: Glue on small pieces of plastic or foamboard to create the raised detailing around the number 9, as seen in the reference images.
    4. Paint: Paint the base blue to match the rest of the console. Once dry, use masking tape to create the white square around the number 9. Paint the square white and remove the masking tape.
    5. Add Labels: Cut out tiny pieces of paper and write the labels “WARNING” and “SIGNALS” as seen in the reference images. Glue them onto the number 9 base.
    6. Attach to Console: Glue the number 9 screen to the appropriate location on the console.

    Testing and Troubleshooting the Console

    Wiring and Circuitry

    Verify the wiring and circuitry thoroughly. Ensure that all connections are secure, and that there are no loose wires or shorts. Use a multimeter to test for continuity and correct voltage levels.

    Power Supply

    Confirm that the power supply is providing the correct voltage and amperage. Replace the power supply if necessary.

    LEDs and Displays

    Test the LEDs and displays by applying power to the console. Ensure that they illuminate properly and display the expected information. Replace any faulty LEDs or displays.

    Buttons and Switches

    Test all buttons and switches for proper operation. Verify that they make contact when pressed and release when released. Clean or replace any malfunctioning buttons or switches.

    Sensors

    Test the sensors by simulating the appropriate input signals. Ensure that they provide accurate readings and respond as expected. Calibrate or replace any faulty sensors.

    Software

    Load the software onto the console and run diagnostics. Verify that the software is functioning correctly and that all features are operational. Update or reinstall the software if necessary.

    Assembly and Calibration

    Assemble the console components securely. Calibrate any adjustable components, such as the time rotor or the navigation controls, to ensure optimal performance.

    Final Testing

    Conduct a full system test by operating the console under various conditions. Simulate different scenarios to verify that the console responds appropriately. Adjust or repair any components that do not perform as expected.

    How to Build the 11th Doctor’s 2nd TARDIS Console

    The 11th Doctor’s second TARDIS console is a popular choice for fans of the show, and it’s relatively easy to build. Here’s a step-by-step guide on how to do it:

    1. Gather your materials. You will need:

      • A wooden box
      • A piece of plywood
      • A drill
      • Screws
      • A saw
      • Sandpaper
      • Paint
      • Clear varnish

    2. Cut the plywood to fit the inside of the box. This will be the base of the console.

    3. Drill holes in the plywood and attach it to the inside of the box using screws.

    4. Cut the wood to create the shape of the console. This can be done using a saw or a jigsaw.

    5. Sand the wood smooth and paint it the color of your choice.

    6. Attach the wood to the base of the console using screws.

    7. Add any details you want, such as buttons, knobs, or a screen.

    8. Seal the console with clear varnish to protect it from wear and tear.

    9. Your 11th Doctor’s 2nd TARDIS console is now complete!

    People Also Ask

    What is the 11th Doctor’s second TARDIS console made of?

    The 11th Doctor’s second TARDIS console is made of wood and plywood.

    How long does it take to build the 11th Doctor’s second TARDIS console?

    It takes about a day to build the 11th Doctor’s second TARDIS console.

    Is it difficult to build the 11th Doctor’s second TARDIS console?

    No, it is not difficult to build the 11th Doctor’s second TARDIS console. It is a relatively simple project that can be completed in a day.