5 Easy Steps to Change Your Keurig Water Filter 2.0

Maintaining a clean and functional water filter is essential for your Keurig brewer to deliver the best-tasting coffee. The Keurig Water Filter 2.0 needs replacing every couple of months, or more frequently if you use your brewer frequently. Changing the filter is a quick and easy process that takes only a few minutes. Here’s a step-by-step guide on how to change the Keurig Water Filter 2.0:

Firstly, you’ll need to locate the water filter housing, which is typically found on the back or side of your Keurig brewer. Once you’ve found the housing, press the release button and pull it straight out. Next, remove the old water filter by twisting it counterclockwise. Be careful not to spill any water.

Now, insert the new water filter into the housing by twisting it clockwise until it’s snug. Make sure the filter is seated properly and that the o-ring is in place. Finally, reinsert the housing back into the brewer and press the release button to lock it in place. Run a few cycles of water through the brewer to flush out any air bubbles and prime the new filter. Your Keurig brewer is now ready to use with fresh, filtered water.

Identifying the Keurig Water Filter 2.0

The Keurig Water Filter 2.0 is a vital component of your Keurig coffee maker, ensuring that your coffee tastes its best. It removes impurities from the water, such as chlorine, calcium, and magnesium, which can affect the flavor of your coffee. Identifying the Water Filter 2.0 is crucial for maintaining your coffee maker’s performance and getting the most out of your coffee experience. Here’s how to do it:

Visual Inspection

The Keurig Water Filter 2.0 is located in the water reservoir of your coffee maker. It is typically white and has a cylindrical shape with a small handle on top. The handle may be black, gray, or clear depending on your Keurig model. You can easily remove the water reservoir from the coffee maker by lifting it straight up. Once removed, check the bottom of the reservoir; you should see a round, removable part that houses the water filter. This is the Water Filter 2.0.

Checking the Model Number

If you’re not sure whether you have a Water Filter 2.0, you can check the model number of your Keurig coffee maker. The model number is usually located on a sticker on the bottom or back of the machine.

Keurig Water Filter Models

If the model number begins with a “K” followed by a letter (e.g., K-Elite, K-Select), your coffee maker is likely compatible with the Water Filter 2.0. If the model number does not start with a “K” (e.g., B145 or V70), it uses a different type of water filter.

Gathering Necessary Materials

To change the water filter in your Keurig 2.0, you will need the following materials:

1. Keurig 2.0 Water Filter

This is the most important item, of course. You can purchase Keurig 2.0 water filters from the Keurig website, or from various other retailers.

2. Water Filtration System Access Door

The water filtration system access door is located on the back of the Keurig 2.0. It is usually a small, black door with a handle. To open the door, simply pull on the handle.

3. Water Filter Removal Tool

The water filter removal tool is a small, plastic tool that is included with all Keurig 2.0 coffee makers. The tool helps to remove the old water filter from the system.

4. Soft Cloth or Paper Towels

You will need a soft cloth or paper towels to dry the water filter housing after you have removed the old filter.

5. Water Source

You will need a source of water to fill the new filter and rinse the system.

Flushing the Keurig Machine

1. Remove the Water Reservoir

Remove the water reservoir from the Keurig machine by lifting it straight up.

2. Discard Old Water

Pour out the remaining water from the reservoir.

3. Fill the Reservoir with Water

Fill the water reservoir with fresh, cold water up to the “Max” line.

4. Run the Reservoir Flush

With the reservoir in place, insert a paper clip into the small hole located in the top of the reservoir door. Hold the paper clip for a few seconds to initiate the reservoir flush.

5. Fill and Empty the Reservoir

Fill the water reservoir again and let the Keurig machine run another brew cycle to flush any remaining cleaning solution from the system.

6. Detailed Steps for Running the Reservoir Flush

Step	Description
1	Locate the small hole in the top of the reservoir door.
2	Insert a paper clip into the hole and hold it for a few seconds.
3	Water will start flowing through the machine.
4	Hold the paper clip until the water stops flowing.
5	Remove the paper clip and close the reservoir door.

Materials You’ll Need

Before you begin, make sure you gather the following materials:

Keurig 2.0 Water Filter Starter Kit or replacement filter
Water pitcher filled with fresh water

Instructions

1. Run a Hot Water Brew Cycle (without a pod): This will help flush out any remaining water from the reservoir.

2. Open the Reservoir Door: Locate the reservoir door on the front of your Keurig machine and lift it open.

3. Remove the Empty Filter Holder: Grip the filter holder and pull it straight up and out of the reservoir.

4. Remove the Old Filter (if present): If there is an old filter installed, gently pull it out of the holder.

5. Soak the New Filter for 5 Minutes: Submerge the new filter in a pitcher of fresh water for 5 minutes.

6. Insert the Filter into the Holder: After soaking, take the filter out of the water and insert it into the filter holder, aligning the tabs with the slots.

7. Reinstall the Filter Holder: Slide the filter holder back into the reservoir, making sure it’s seated securely.

8. Close the Reservoir Door: Bring the reservoir door down and snap it closed.

9. Fill the Reservoir: Pour fresh water into the reservoir up to the “Max Fill” line.

10. Run a Cleaning Cycle: Place a large mug (at least 10 oz) on the drip tray. Run 4-6 brew cycles (without a pod) to flush the system and remove any air bubbles. Discard the water after each cycle.

How to Change Keurig Water Filter 2.0

The Keurig 2.0 water filter is designed to remove impurities from your water, resulting in better-tasting coffee. It’s important to change the filter regularly to ensure optimal performance. Here’s a step-by-step guide on how to do it:

Open the top of the Keurig and remove the water reservoir.

Locate the water filter holder inside the reservoir.

Press the release button on the filter holder and remove the old filter.

Unpack the new filter and remove the protective cap.

Insert the new filter into the holder and press down until it clicks into place.

Replace the water reservoir in the Keurig.

Run a brew cycle without coffee grounds to flush the system.