Changing the oil and filter in your 2024 Enclave is a relatively simple task that can be completed in about 30 minutes. By following these step-by-step instructions, you can save yourself the time and money of taking your car to a mechanic. In addition to being cost-effective, changing your oil and filter regularly can help extend the life of your engine.
Before you begin, you will need to gather the following materials:
– New oil filter
– New oil (5 quarts)
– Oil drain pan
– Funnel
– Wrench
– Gloves
– Rags
Note: It is important to consult your vehicle’s owner’s manual for specific instructions and safety precautions before attempting any maintenance work. Additionally, you should wear gloves and safety glasses when working on your car. Once you have gathered your materials, you can begin the oil change process by following the steps outlined below.
Locating the Oil Drain Plug
The location of the oil drain plug on a 2024 Buick Enclave depends on the engine type. For the 3.6L V6 Engine, the oil drain plug is located on the bottom of the oil pan, facing toward the passenger side of the vehicle. For the 2.0L Turbocharged Engine, the oil drain plug is also located on the bottom of the oil pan, but facing toward the driver’s side of the vehicle.
To locate the oil drain plug on either engine, follow these steps:
- Park the vehicle on a level surface.
- Allow the engine to cool down for at least 30 minutes.
- Locate the oil pan under the engine. The oil pan is a large metal pan that holds the engine oil.
- Look for the oil drain plug on the bottom of the oil pan. The oil drain plug is usually a 17mm bolt with a washer.
| Engine Type | Oil Drain Plug Location |
|---|---|
| 3.6L V6 | Bottom of oil pan, facing passenger side |
| 2.0L Turbocharged | Bottom of oil pan, facing driver’s side |
How To Change Oil And Filter On 2024 Enclave
Changing the oil and filter on your 2024 Enclave is a relatively simple task that can be completed in about 30 minutes. By following these step-by-step instructions, you can save yourself the time and expense of having it done by a mechanic.
Materials you will need:
- 5 quarts of 5W-30 synthetic oil
- New oil filter (ACDelco PF63E or equivalent)
- Oil filter wrench
- Funnel
- Drain pan
- Rags or paper towels
Step-by-step instructions:
- Park your Enclave on a level surface and engage the parking brake.
- Open the hood and locate the oil dipstick. Remove the dipstick and wipe it clean with a rag.
- Reinsert the dipstick into the tube and remove it again. The oil level should be between the “Min” and “Max” marks on the dipstick.
- Locate the oil drain plug on the bottom of the oil pan. Place the drain pan under the oil drain plug.
- Use the oil filter wrench to loosen the oil drain plug. Allow the oil to drain into the drain pan.
- Once the oil has drained, replace the oil drain plug and tighten it with the oil filter wrench.
- Locate the oil filter on the top of the engine. Use the oil filter wrench to loosen the oil filter.
- Remove the old oil filter and apply a thin layer of new oil to the gasket of the new oil filter.
- Screw on the new oil filter by hand until it is snug. Then, use the oil filter wrench to tighten it another 3/4 of a turn.
- Add 5 quarts of new oil to the engine through the oil filler cap.
- Replace the oil filler cap and tighten it.
- Start the engine and let it run for a few minutes. Then, shut off the engine and check for any leaks.
- Check the oil level on the dipstick. The oil level should be between the “Min” and “Max” marks on the dipstick.
People Also Ask About How To Change Oil And Filter On 2024 Enclave
How often should I change the oil and filter on my 2024 Enclave?
The 2024 Enclave requires an oil change every 7,500 miles under normal driving conditions.
What type of oil should I use in my 2024 Enclave?
The 2024 Enclave requires 5W-30 synthetic oil.
Where is the oil filter located on my 2024 Enclave?
The oil filter on the 2024 Enclave is located on the top of the engine.
