Armitron watches are known for their durability and affordability, making them a popular choice for people of all ages. However, if you’ve ever tried to change the time on an Armitron watch, you know that it can be a bit tricky. The buttons are small and the instructions are often unclear. In this article, we’ll walk you through the steps on how to change the time on an Armitron watch, so you can get back to your day without missing a beat.
First, you’ll need to locate the two buttons on the side of the watch. The top button is the “mode” button, and the bottom button is the “set” button. To change the time, you’ll need to press the “mode” button until you reach the “time” setting. Once you’re in the “time” setting, you can use the “set” button to adjust the hours, minutes, and seconds. Once you’ve set the correct time, press the “mode” button again to exit the “time” setting.
If you’re having trouble changing the time on your Armitron watch, don’t worry. You can always consult the user manual for more detailed instructions. With a little practice, you’ll be able to change the time on your Armitron watch in no time. Additionally, most Armitron watches have a digital display, which makes it easy to read the time even in low-light conditions. The watches are also water-resistant, so you don’t have to worry about them getting damaged if you get caught in the rain.
Locating the Time Adjustment Button
Armitron watches are known for their durability and stylish designs. They also offer a wide range of features, including the ability to change the time. However, if you’re not familiar with Armitron watches, finding the time adjustment button can be a bit tricky.
There are a few different ways to locate the time adjustment button on an Armitron watch. The most common method is to look for a small button on the side of the watch case. This button is usually located near the 2 o’clock position. If you can’t find a button on the side of the watch case, check the back of the watch. Some Armitron watches have a time adjustment button located on the back of the case.
Once you’ve located the time adjustment button, you can use it to change the time on your watch. To do this, simply press and hold the button until the time starts to flash. Then, use the up and down buttons to adjust the time. Once you’ve set the correct time, press the time adjustment button again to save your changes.
Here’s a table summarizing the steps on how to locate the time adjustment button on an Armitron watch:
| Step | Description |
|---|---|
| 1 | Look for a small button on the side of the watch case near the 2 o’clock position. |
| 2 | If you can’t find a button on the side of the watch case, check the back of the watch. |
| 3 | Once you’ve located the time adjustment button, press and hold it until the time starts to flash. |
Setting the Hour Hand
Pull out the crown to the first click position. This is the position where you can adjust the date. Turn the crown counterclockwise to set the hour hand to the desired time. Make sure that you account for AM and PM.
Rotating the Crown
The crown can be rotated in two directions: clockwise and counterclockwise. Turning the crown clockwise will advance the hour hand forward, while turning it counterclockwise will move the hour hand backward.
| Direction | Effect |
|---|---|
| Clockwise | Advances the hour hand forward |
| Counterclockwise | Moves the hour hand backward |
Once the hour hand is set to the correct time, push the crown back into its original position to save the setting.
Setting the Minute Hand
Locate the crown on the side of the watch, just below the 2 o’clock position. Pull the crown out to the farthest position (position 2). This will set the watch into time-setting mode.
Turn the crown clockwise to advance the minute hand. Advance the minute hand by pressing the crown in all the way to position 1, which will engage the second hand. You now have 5 seconds to reset the time.
Tips
- Rotate the minute hand 12 times to complete 1 hour.
- If you overshoot the desired time, pull the crown back out to position 2 and turn it counterclockwise to move the minute hand backward.
- Release the crown when the time has been correctly set.
- To set the seconds, press the crown in halfway (position 1) and immediately release it. The second hand will reset to 0.
Setting the Second Hand (Optional)
If your Armitron watch has a second hand, you can set it to the correct time by following these steps:
1. Pull the crown out to the second position.
2. Use the hour and minute hands to set the time to the nearest minute.
3. Wait for the second hand to reach the 12 o’clock position.
4. Push the crown back in to the first position. The second hand will start moving immediately.
Here is a table that summarizes the steps for setting the second hand:
| Step | Action |
|---|---|
| 1 | Pull the crown out to the second position. |
| 2 | Use the hour and minute hands to set the time to the nearest minute. |
| 3 | Wait for the second hand to reach the 12 o’clock position. |
| 4 | Push the crown back in to the first position. The second hand will start moving immediately. |
Note: If you are setting the time on a digital Armitron watch, the second hand will automatically set itself when you set the hour and minute hands.
Adjusting for 12/24-Hour Format
Many Armitron watches allow you to switch between 12-hour and 24-hour time formats. To do this, you’ll need to access the watch’s settings menu. The specific steps for doing this will vary depending on your watch model, but here are some general guidelines:
- Press and hold the “Mode” button until you see the settings menu.
- Use the “Up” or “Down” buttons to scroll to the “Time Format” setting.
- Press the “Mode” button to toggle between 12-hour and 24-hour format.
- Press and hold the “Mode” button to exit the settings menu.
- Your watch will now display the time in the selected format.
Here is a table summarizing the steps for adjusting the time format on different Armitron watch models:
- Press and hold the “Mode” button for 2 seconds.
- Use the “Up” or “Down” buttons to scroll to the “Time Format” setting.
- Press the “Mode” button to toggle between 12-hour and 24-hour format.
- Press and hold the “Mode” button for 2 seconds to exit the settings menu.
- Press the “Adjust” button.
- Use the “Up” or “Down” buttons to scroll to the “Time Format” setting.
- Press the “Adjust” button to toggle between 12-hour and 24-hour format.
- Press the “Adjust” button to exit the settings menu.
- Press and hold the “Set” button for 3 seconds.
- Use the “Up” or “Down” buttons to scroll to the “Time Format” setting.
- Press the “Set” button to toggle between 12-hour and 24-hour format.
- Press and hold the “Set” button for 3 seconds to exit the settings menu.
Adjusting the Time
To adjust the time, follow these steps:
1. Pull the crown out to the second position.
2. Rotate the crown clockwise to move the hour hand forward.
3. Rotate the crown counterclockwise to move the hour hand backward.
4. When the correct hour is reached, press the crown back into its original position.
5. Rotate the crown clockwise to move the minute hand forward.
6. Rotate the crown counterclockwise to move the minute hand backward.
7. When the correct minute is reached, press the crown back into its original position.
Adjusting the Date (Optional)
To adjust the date (if applicable), follow these steps:
1. Pull the crown out to the first position.
2. Rotate the crown clockwise to move the date forward.
3. Rotate the crown counterclockwise to move the date backward.
4. When the correct date is reached, press the crown back into its original position.
| Watch Model | Steps |
|---|---|
| WR50 | |
| WR90 | |
| WR100 |
| Button Position | Function |
|---|---|
| Neutral Position | Normal timekeeping |
| First Position | Set date |
| Second Position | Set time |
Saving the Time Setting
To save the time setting, press the Mode button one last time. This will return you to the timekeeping mode, and the new time will be displayed.
Additional Notes:
– If you make a mistake while setting the time, you can press the Reset button to start over.
– The Armitron watch will automatically switch to daylight saving time (DST) if it is set to the correct time zone.
– If you change the time zone, you may need to adjust the time setting manually.
Time Zone Table
| Time Zone | Abbr. | UTC Offset |
|---|---|---|
| Eastern Time (US and Canada) | ET | UTC-5 |
| Central Time (US and Canada) | CT | UTC-6 |
| Mountain Time (US and Canada) | MT | UTC-7 |
| Pacific Time (US and Canada) | PT | UTC-8 |
| Alaska Time (US) | AKDT | UTC-9 |
| Hawaii-Aleutian Time (US) | HST | UTC-10 |
Troubleshooting Display Issues
Display is blank:
- Check the battery. If the battery is low, replace it.
- Check the connections between the battery and the watch.
Display is dim:
- Check the battery. If the battery is low, replace it.
- Check the connections between the battery and the watch.
Display is flickering:
- Check the connections between the battery and the watch.
- If the connections are secure, the watch may need to be serviced.
Display shows incorrect time:
- Check if the watch is in the correct time zone.
- If the watch is in the correct time zone, the watch may need to be reset.
Display shows error message:
- Check the watch’s user manual for the meaning of the error message.
- If the error message is not listed in the user manual, the watch may need to be serviced.
Display is damaged:
- If the display is cracked or broken, the watch will need to be serviced.
How to Change the Time on an Armitron Watch
Armitron watches are known for their precision and durability. Changing the time on an Armitron watch is a simple process that can be completed in a few easy steps.
Steps
- Pull the crown out to the first position.
- Turn the crown clockwise to change the time.
- Push the crown back into place.
Tips for Accurate Timekeeping
Follow these tips to ensure that your Armitron watch keeps accurate time:
Keep your watch clean.
Dirt and dust can accumulate on the watch’s movement, which can affect its accuracy. Clean your watch regularly with a soft cloth and mild soap.
Avoid exposing your watch to extreme temperatures.
Extreme heat or cold can damage the watch’s movement and affect its accuracy. Avoid leaving your watch in direct sunlight or near a heat source.
Do not overwind your watch.
Overwinding your watch can damage the watch’s mainspring. Wind your watch only until you feel resistance.
Have your watch serviced regularly.
A qualified watchmaker can clean and lubricate your watch, which will help to keep it running accurately. It is recommended to have your watch serviced every 2-3 years.
Magnetic fields can affect your watch’s accuracy.
Keep your watch away from magnetic fields, such as those generated by magnets, speakers, and power lines.
Avoid dropping your watch.
Dropping your watch can damage the watch’s movement and affect its accuracy. If you do drop your watch, have it inspected by a qualified watchmaker.
If you are not sure how to change the time on your Armitron watch, consult your watch’s user manual.
The user manual will provide specific instructions on how to change the time on your watch model.
How To Change The Time On An Armitron Watch
Avoiding Common Pitfalls
Here are a few things to keep in mind when changing the time on your Armitron watch:
- Make sure that you are pressing the correct buttons. The buttons on the left side of the watch are used to adjust the time, while the buttons on the right side are used to adjust the alarm.
- Don’t hold down the buttons for too long. A short press is all that is needed to change the time.
- If you make a mistake, simply press the Mode button to start over.
- Remember to press the Set button to save your changes.
- If you are having trouble changing the time, consult the user manual for your watch.
- Be careful not to get water on your watch while you are changing the time.
- If you have a waterproof watch, make sure that the crown is screwed down tightly before you get it wet.
- Don’t change the time too often. Changing the time too often can wear out the battery.
- If you are traveling to a different time zone, be sure to change the time on your watch as soon as you arrive.
- Here is a table summarizing the steps involved in changing the time on an Armitron watch:
| Step | Description |
|---|---|
| 1 | Press the Mode button until the Timekeeping mode is displayed. |
| 2 | Press the Set button. |
| 3 | Use the Adjust buttons to change the hour. |
| 4 | Press the Set button. |
| 5 | Use the Adjust buttons to change the minute. |
| 6 | Press the Set button. |
| 7 | Use the Adjust buttons to change the second. |
| 8 | Press the Set button. |
| 9 | Press the Mode button to exit the Timekeeping mode. |
How to Change the Time on an Armitron Watch
Armitron watches are known for their accuracy and style, but they can be a little tricky to set. If you’re having trouble changing the time on your Armitron watch, follow these steps:
- Pull out the crown. The crown is the small knob on the side of the watch. Pull it out to the first position.
- Turn the crown to set the hour and minutes. Turn the crown clockwise to move the hands forward and counterclockwise to move them backward.
- Press the crown back in. Once you’ve set the time, press the crown back into place.
If you’re still having trouble, you can consult your watch’s user manual for more specific instructions.
People Also Ask
How do I change the date on my Armitron watch?
To change the date on your Armitron watch, pull out the crown to the second position. Then, turn the crown clockwise to advance the date. Once you’ve set the date, press the crown back into place.
How do I change the battery in my Armitron watch?
To change the battery in your Armitron watch, you’ll need a small Phillips head screwdriver. Open the back of the watch by removing the four screws. Then, remove the old battery and replace it with a new one. Finally, close the back of the watch and tighten the screws.
How do I reset my Armitron watch?
To reset your Armitron watch, hold down the mode button for about 5 seconds. The watch will beep and the hands will move to the 12 o’clock position. Then, press the mode button again to set the time.
