The Uppababy stroller is a popular choice for parents due to its durability, versatility, and ease of use. However, one of the most common questions parents have about the Uppababy stroller is how to collapse it. While it may seem like a daunting task, collapsing the Uppababy stroller is actually quite simple. With a few easy steps, you can have your stroller folded up and ready to go in no time.
Firstly, you will need to make sure that the seat is in the fully upright position. Next, you will need to push down on the two buttons located on the sides of the stroller frame. Once you have pushed down on the buttons, you will need to lift up on the handle located on the back of the stroller seat. As you lift up on the handle, the stroller will begin to fold. Once the stroller is fully folded, you will need to secure the folded stroller with the strap located on the side of the stroller frame.
Finally, you can store the folded stroller in the trunk of your car or in a closet. The Uppababy stroller is lightweight and compact, making it easy to store and transport. Whether you are going for a walk in the park or traveling across the country, the Uppababy stroller is a great choice for parents on the go.
Unlocking the Safety Mechanisms
Before collapsing your Uppababy stroller, it’s crucial to unlock the safety mechanisms to prevent any damage or injury. This process varies slightly depending on your stroller model.
Vista/Cruz/Vista V2
- Locate the Safety Buckle: The safety buckle is located on the front of the stroller, where the child’s harness straps connect. Press the center button and lift the buckle up to release the harness straps.
- Unlock the Frame Lock: Squeeze the two frame lock buttons located on the handlebars together. Simultaneously, push the stroller’s handles down towards the rear wheels.
- Disengage the Canopy: If your stroller has a canopy, lift the canopy release levers located on the back of the canopy and fold it down.
Minu
- Unbuckle the Harness: Similar to the Vista/Cruz models, press the center button on the safety buckle to release the harness straps.
- Unhook the Shoulder Straps: Unhook the shoulder straps from the harness release lever located on the back of the seat.
- Activate the Auto-Lock: Squeeze the auto-lock buttons on the handlebars and lift the stroller by the handles. The stroller will automatically collapse into a compact size.
Mesa/Messa V2 Car Seat
- Release the Carrier: Press the release button on the back of the car seat and lift the infant carrier off the stroller base.
- Unlock the Base: Push the button on the front of the stroller base and fold it down.
- Disassemble the Base: If desired, you can disassemble the stroller base for more compact storage. To do this, squeeze the two release buttons on the sides of the base and lift the front of the base off the rear wheels.
Lowering the Seat Recline
The Uppababy stroller’s seat can be reclined to multiple positions, including a fully flat position for newborns. Before collapsing the stroller, it’s essential to lower the seat recline to avoid damaging the stroller or pinching the child.
To lower the seat recline, follow these steps:
- Locate the recline lever on the back of the seat.
- Pull the lever towards you.
- Gently push the seat back until it reaches the desired recline position.
To ensure the seat is fully reclined, check if the recline lever is parallel to the ground. Here’s a table summarizing the recline positions and their corresponding lever positions:
| Seat Recline Position | Lever Position |
|---|---|
| Fully Upright | Lever Perpendicular to the Ground |
| Partially Reclined | Lever Angled Downward |
| Fully Reclined | Lever Parallel to the Ground |
Folding the Canopy
To fold the canopy, start by unbuckling the canopy release buckle located on the back of the canopy. Next, grab the canopy from both sides and pull it down towards the handlebar. As you pull the canopy down, you will feel it “click” into place. To secure the canopy in the folded position, fasten the canopy release buckle.
Additional Tips for Folding the Canopy
Here are a few additional tips for folding the canopy:
| Tip | Description |
|---|---|
| Use both hands | This will help you to evenly distribute the force and prevent the canopy from getting damaged. |
| Pull down slowly | This will help to prevent the canopy from getting caught on anything. |
| Make sure the canopy is secure | This will help to prevent the canopy from flapping in the wind or getting damaged. |
Detaching the Child Tray
Before collapsing the stroller, remove the child tray. This ensures that the tray doesn’t get damaged during the folding process.
- Locate the release buttons on either side of the tray.
- Press both buttons simultaneously.
- Lift the tray straight up and away from the stroller frame.
Additional Tips:
- If the tray is stubborn, apply gentle pressure to the release buttons while lifting.
- Store the tray in a safe place to avoid damage.
- To reattach the tray, follow the same steps in reverse order.
| Steps | Description |
|---|---|
| Step 1 | Locate the release buttons on either side of the tray. |
| Step 2 | Press both buttons simultaneously. |
| Step 3 | Lift the tray straight up and away from the stroller frame. |
Removing the Wheels
To remove the wheels on an Uppababy stroller, follow these steps:
- Front wheels: Press the buttons on either side of the wheelbase to release the front wheels. Pull the wheels straight out to remove them.
- Rear wheels: Remove the center cap on the rear wheel. Press the button on the wheelbase and pull the wheel straight out to remove it.
Removing the Front Wheels
The front wheels of an Uppababy stroller can be easily removed for cleaning or storage. To do so, follow these steps:
1. Press the buttons on either side of the wheelbase to release the front wheels.
2. Pull the wheels straight out to remove them.
Removing the Rear Wheels
The rear wheels of an Uppababy stroller are slightly more difficult to remove than the front wheels, but the process is still relatively simple. To do so, follow these steps:
1. Remove the center cap on the rear wheel.
2. Press the button on the wheelbase.
3. Pull the wheel straight out to remove it.
Table: Wheel Removal Summary
The following table summarizes the steps for removing the wheels on an Uppababy stroller:
| Wheel Type | Removal Steps |
|---|---|
| Front |
|
| Rear |
|
Collapsing the Main Frame
Step 1: Unzip the Seat Recline Lever
Press the black button located at the top of the lever and pull the zipper upwards to release the backrest.
Step 2: Fold the Seat Backwards
Grip the sides of the seat backrest and pull it down towards the back of the stroller. Ensure the seat locks into place with an audible click.
Step 3: Release the Handlebar Quick Release Axle
Locate the small lever on the left side of the handlebar. Push the lever in and lift the handlebar to release it from the axle.
Step 4: Lower the Handlebar
Fold the handlebar downwards by pressing the grey button on the right side and guiding it down.
Step 5: Release the Main Frame Latch
Press the red latch located on the left side of the frame, near the front wheels. This will unlock the main frame.
Step 6: Fold the Main Frame
With one hand, hold the center of the frame and with the other, pull the frame towards you until it collapses. Make sure the stroller is fully collapsed and the latch secures the frame in place.
Unlocking the Main Frame Latch:
| Action | Step-by-Step Instructions |
|---|---|
| Locate the main frame latch | It’s a red latch located on the left side of the frame, near the front wheels. |
| Press the latch | Use your thumb or palm to push the latch inwards. |
| Pull the frame towards you | With your other hand, pull the main frame towards you to release it and collapse the stroller. |
Storing the Stroller Compactly
7. Fold the Canopy and Bumper Bar
- Unzip the canopy from the frame, starting at the back and working your way to the front.
- Fold the canopy in half, lengthwise, bringing the edges together.
- Wrap the canopy around the folded seat and secure it with the hook-and-loop fastener.
- Detach the bumper bar from the stroller by pressing the buttons on either side.
- Fold the bumper bar in half and place it inside the folded canopy.
| Item | Steps |
|---|---|
| Canopy | Unzip, fold in half, secure |
| Bumper Bar | Detach, fold in half, store inside canopy |
-
Fold the stroller in half, bringing the front wheels together with the rear wheels.
-
Rotate the folded stroller 90 degrees so that the wheels are on the side.
-
Secure the stroller in the folded position using the latch or lock provided.
-
Tip: For added compactness, you can remove the wheels before folding the stroller. This is especially useful for storing the stroller in a small car trunk or closet.
Securing the Carry Handle
9. **Locate the Release Levers on the Carry Handle:** Identify the two levers located on either side of the carry handle.
10. **Simultaneously Squeeze the Release Levers:** Firmly grasp both release levers and squeeze them inward, toward each other.
11. **Lift the Carry Handle Upward:** While holding the release levers, gently lift the carry handle upward, rotating it slightly toward the rear of the stroller.
12. **Secure the Carry Handle:** Continue lifting the carry handle until it reaches its highest position. The handle will lock into place, securely securing it for storage or transportation.
To release the carry handle, simply reverse the steps: squeeze the release levers, lower the handle, and release the levers.
| Release Levers | Location | Action |
|---|---|---|
| Two levers | On either side of the carry handle | Squeeze inward to release |
| Carry Handle | Secured | Lift up and rotate |
Troubleshooting Common Issues
Stroller won’t collapse
Make sure the seat is in the fully reclined position. Push down on the release lever on the back of the seat and lift the handlebar to collapse the stroller.
Ensure that the stroller is placed on a flat surface. If the stroller is on an uneven surface, it may not collapse properly.
Stroller wobbles or shakes
Check if the wheels are securely attached and the stroller is not overloaded.
Inspect the stroller for any loose screws or bolts. Tighten any loose fasteners.
Brake doesn’t work
Make sure the brake is fully engaged by pushing down firmly on the pedal.
Check if the brake cable is securely attached and not obstructed by debris.
Can’t attach car seat
Ensure that the car seat is compatible with the stroller. Not all car seats are compatible with all strollers.
Follow the manufacturer’s instructions for attaching the car seat to the stroller.
Can’t remove car seat
Make sure the car seat is unlocked from the stroller. Pull the release lever on the back of the car seat to detach it.
Check if the car seat is securely attached to the stroller before attempting to remove it.
Stroller is too hard to push
Check if the wheels are properly inflated. Underinflated wheels can make the stroller harder to push.
Ensure that the stroller is not overloaded. A heavy load can make the stroller more difficult to maneuver.
Stroller has a strange noise
Identify the source of the noise by checking different parts of the stroller.
Contact the manufacturer for further troubleshooting if you cannot identify the source of the noise.
Can’t fold or unfold the stroller
Ensure that the stroller is completely collapsed before attempting to fold or unfold it.
Refer to the manufacturer’s instructions for specific folding and unfolding procedures.
Stroller is damaged
Assess the extent of the damage. Minor damage may be repairable at home.
Contact the manufacturer for repairs if the damage is severe or you are unsure about repairing it yourself.
How to Collapse Uppababy Stroller
Collapsing your Uppababy stroller is a simple process that can be completed in just a few steps. Here’s how to do it:
- Remove the child from the stroller.
- Fold the canopy.
- Unfold the release lever on the side of the stroller.
- Pull the lever towards you to collapse the stroller.
- Fold the stroller down until it is completely collapsed.
- Secure the stroller with the attached strap.
People Also Ask About How to Collapse Uppababy Stroller
How do you fold an Uppababy stroller with a toddler seat?
To fold an Uppababy stroller with a toddler seat, follow these steps:
- Remove the child from the stroller.
- Unfold the release lever on the side of the stroller.
- Pull the lever towards you to collapse the stroller.
- Fold the stroller down until it is completely collapsed.
- Secure the stroller with the attached strap.
How do you collapse an Uppababy stroller with a bassinet?
To collapse an Uppababy stroller with a bassinet, follow these steps:
- Remove the child from the bassinet.
- Unfold the release lever on the side of the bassinet.
- Pull the lever towards you to collapse the bassinet.
- Fold the bassinet down until it is completely collapsed.
- Secure the bassinet with the attached strap.
