Upgrading your bathroom can be a great way to improve its style and functionality, and one simple yet effective way to do that is to install a tub spout with a diverter. This will allow you to easily switch between the bathtub and shower, making it a more convenient and enjoyable space. While it may seem like a daunting task, installing a tub spout with a diverter is actually quite straightforward – and with a little preparation and the right tools, you can have it done in no time.
Before you begin, it’s important to gather all of the necessary tools and materials. You’ll need a new tub spout with diverter, a wrench, plumber’s tape, and a pair of pliers. Once you have everything you need, you can start by turning off the water supply to the tub. Next, remove the old tub spout by unscrewing it from the wall. Once the old spout is removed, clean the threads on the wall with a damp cloth to remove any dirt or debris.
Now it’s time to install the new tub spout with diverter. Start by wrapping the threads on the new spout with plumber’s tape, which will help to create a watertight seal. Next, screw the new spout onto the wall, tightening it with the wrench. Once the spout is secure, attach the diverter to the spout and tighten it with the pliers. Finally, turn on the water supply and check for any leaks. If you find any leaks, simply tighten the connections until they stop.
Check for Leaks
It’s crucial to verify for any potential leaks after completing the installation to ensure the tub spout’s proper operation and prevent any water damage. Here are the steps to check for leaks:
- Turn on the Water: Open the hot and cold water faucets to observe any water coming from the tub spout.
- Inspect the Tub Spout: Check the base of the tub spout where it connects to the wall or tub deck for any drips or leaks.
- Examine the Diverter Valve: Ensure that no water is leaking around the diverter valve, which allows water to flow between the tub spout and showerhead.
- Check the Water Connections: Verify that the connections between the tub spout and the water supply lines are secure and not leaking.
- Use a Flashlight: Shine a flashlight behind the tub spout to check for any concealed leaks that may not be visible under normal lighting conditions.
- Wait and Observe: Allow the water to run for a few minutes and observe if there are any signs of leaks or drips that may develop over time.
If you encounter any leaks, tighten any loose connections or replace faulty components as necessary. Ensure that all connections are secure and that no water is escaping from any part of the installation.
| Potential Leak Sources | Troubleshooting Actions |
|---|---|
| Tub spout base | Tighten the connection to the wall or tub deck. |
| Diverter valve | Replace any worn or damaged seals or gaskets. |
| Water connections | Tighten the connections to the water supply lines. |
| Behind the tub spout | Inspect and tighten any loose components or seal any gaps. |
How To Install Tub Spout With Diverter
Installing a tub spout with a diverter is a relatively simple plumbing project that can be completed in a few hours. By following these step-by-step instructions, you can ensure that your new tub spout is installed correctly and functions properly.
Before you begin, gather the necessary tools and materials:
- Adjustable wrench
- Channel-lock pliers
- Teflon tape
- New tub spout with diverter
- Plumber’s putty
Once you have all of your tools and materials, follow these steps to install the tub spout with diverter:
- Turn off the water supply to the tub.
- Remove the old tub spout. To do this, use the adjustable wrench to loosen the nuts that hold the spout in place. Once the nuts are loose, you can pull the spout straight out of the wall.
- Apply a thin layer of Teflon tape to the threads of the new tub spout. This will help to create a watertight seal.
- Insert the new tub spout into the wall. Hand-tighten the nuts until they are snug.
- Use the channel-lock pliers to tighten the nuts further. Be careful not to overtighten the nuts, as this could damage the spout or the wall.
- Apply a bead of plumber’s putty around the base of the tub spout. This will help to seal any gaps and prevent water from leaking.
- Turn on the water supply to the tub and check for leaks. If there are any leaks, tighten the nuts further or apply more plumber’s putty.
People Also Ask About How To Install Tub Spout With Diverter
How do I replace a tub spout with a diverter?
To replace a tub spout with a diverter, follow these steps:
- Turn off the water supply to the tub.
- Remove the old tub spout. To do this, use the adjustable wrench to loosen the nuts that hold the spout in place. Once the nuts are loose, you can pull the spout straight out of the wall.
- Apply a thin layer of Teflon tape to the threads of the new tub spout. This will help to create a watertight seal.
- Insert the new tub spout into the wall. Hand-tighten the nuts until they are snug.
- Use the channel-lock pliers to tighten the nuts further. Be careful not to overtighten the nuts, as this could damage the spout or the wall.
- Apply a bead of plumber’s putty around the base of the tub spout. This will help to seal any gaps and prevent water from leaking.
- Turn on the water supply to the tub and check for leaks. If there are any leaks, tighten the nuts further or apply more plumber’s putty.
What is a tub spout diverter?
A tub spout diverter is a device that allows you to switch the flow of water from the tub spout to the showerhead. This is useful if you want to take a shower without getting the tub wet.
How do I install a diverter on a tub spout?
To install a diverter on a tub spout, follow these steps:
- Turn off the water supply to the tub.
- Remove the old diverter. To do this, use the adjustable wrench to loosen the nut that holds the diverter in place. Once the nut is loose, you can pull the diverter straight out of the spout.
- Apply a thin layer of Teflon tape to the threads of the new diverter. This will help to create a watertight seal.
- Insert the new diverter into the spout. Hand-tighten the nut until it is snug.
- Use the adjustable wrench to tighten the nut further. Be careful not to overtighten the nut, as this could damage the diverter or the spout.
- Turn on the water supply to the tub and check for leaks. If there are any leaks, tighten the nut further.
