Moving a Quickmaster QM 46/2 can be a daunting task, but it is not impossible. With the right tools and a little know-how, you can safely and easily move your Quickmaster QM 46/2 to its new location.
The first step is to gather the necessary tools. You will need a pallet jack, a forklift, and a few moving blankets. If you do not have a pallet jack or forklift, you can rent them from a local equipment rental store.
Once you have the necessary tools, you can begin the moving process. First, place the pallet jack under the Quickmaster QM 46/2. Then, use the forklift to lift the Quickmaster QM 46/2 onto the pallet jack. Once the Quickmaster QM 46/2 is on the pallet jack, you can move it to its new location.
When you are moving the Quickmaster QM 46/2, be sure to use caution. The Quickmaster QM 46/2 is a heavy machine, and it can easily tip over if you are not careful. Be sure to keep the pallet jack level and to avoid making any sudden movements.
Preparation for the Move
Moving a Quickmaster QM 46/2 can be a challenging task, but with the right preparation and equipment, it can be done safely and efficiently. The following steps will guide you through the preparation process.
Planning and Preparation:
It’s crucial to plan well and gather all necessary materials before starting the move. Here’s what you need to consider:
- Gather the Necessary Tools and Equipment: Ensure you have the appropriate tools for dismantling and reassembling the machine, such as a wrench set, allen keys, and a hammer.
- Secure Necessary Resources: Arrange for assistance from at least two additional people to help with lifting and transporting the machine. Consider hiring a moving crew if necessary.
- Document the Machine: Take clear photos or videos of the machine before disassembly to aid in the reassembly process later on.
- Prepare the Environment: Clear the area where the machine will be moved to and create a clean and well-lit work environment.
Disconnecting Utilities
Before moving the machine, it’s essential to disconnect all utilities to prevent damage or injury. Here’s a simple checklist:
| Utility | Action |
|---|---|
| Power | Turn off and unplug the machine. |
| Water | Disconnect any water supply hoses or pipes. |
| Gas | If applicable, disconnect gas lines and cap them securely. |
Follow the manufacturer’s instructions regarding any specific safety precautions or procedures for disconnecting utilities.
Disconnecting Utilities
Before moving your Quickmaster QM 46/2, it is important to disconnect all utilities. This includes the following steps:
Gas:
Turn off the gas valve at the source. Disconnect the gas line from the appliance. Cap the gas line and the appliance connection.
Electricity:
Turn off the circuit breaker or fuse that supplies power to the appliance. Unplug the appliance from the electrical outlet.
Water:
Turn off the water supply to the appliance. Disconnect the water line from the appliance. Cap the water line and the appliance connection.
| Utility | Steps to Disconnect |
|---|---|
| Gas |
|
| Electricity |
|
| Water |
|
Packing and Loading Essentials
1. Disassemble the Qm 46/2
– Remove the cutting blade from the machine.
– Detach the handle from the main body.
– Separate the base from the frame.
2. Protect Sensitive Components
– Wrap the cutting blade in bubble wrap or foam to prevent damage.
– Use padding to protect the handle, base, and frame from scratches.
3. Pack Loose Parts Securely
– Place all bolts, washers, and small parts in a secure container to avoid losing them.
– Label the container clearly to prevent confusion during reassembly.
4. Load Heavy Components First
– Place the heavy base of the Qm 46/2 into the truck or trailer first.
– Secure it with straps or rope to prevent it from shifting.
5. Optimize Loading Space
–
| Component | Loading Technique |
|---|---|
| Handle | Lay flat to maximize space. |
| Frame | Position vertically to support other components. |
| Base | Secure in the bottom of the vehicle, centered for balance. |
| Cutting Blade | Store in a protective container to prevent damage. |
Post-Move Maintenance and Inspections
Visual Inspection
Thoroughly examine the Quickmaster QM 46/2 for any damage sustained during transport. Check for loose or missing parts, scratches, or dents on the body or components. Inspect the tires, hoses, and electrical connections for any signs of damage or wear.
Functional Testing
Start the Quickmaster QM 46/2 and perform a series of test runs to ensure proper operation. Verify that the engine starts smoothly, runs idle without any unusual noises or vibrations, and accelerates without hesitation. Check the hydraulics, brakes, and attachments to confirm that they function correctly.
Lubrication and Fluid Checks
Refer to the manufacturer’s maintenance schedule and lubricate any specified components. Check the oil and coolant levels and top up as needed. Inspect the hydraulic lines for any leaks and tighten any loose connections.
Tire Pressure
Ensure that the tires are inflated to the correct pressure as specified by the manufacturer. Underinflated tires can result in poor performance and premature wear, while overinflated tires can compromise stability and increase the risk of blowouts.
Battery Check
Inspect the battery terminals for corrosion or loose connections. Clean the terminals if necessary and tighten any loose connections. Check the battery voltage and ensure that it meets the manufacturer’s specifications.
Safety Features
Verify that all safety features, such as seat belts, warning lights, and emergency stops, are functioning properly. Ensure that the operator’s manual is readily available and that the operator is familiar with the safety procedures.
Cleaning
Clean the Quickmaster QM 46/2 thoroughly to remove any dirt or debris accumulated during transport. Wash the exterior with a hose or pressure washer and dry it with a clean cloth. Inspect the filters and clean or replace them as necessary.
Log Maintenance
Keep a detailed log of all maintenance and inspection activities. Record the date, type of maintenance performed, and any parts replaced. This log can help track maintenance history and identify any recurring issues.
Regular Inspections
Establish a schedule for regular inspections of the Quickmaster QM 46/2 based on the manufacturer’s recommendations and the frequency of use. These inspections should include a visual inspection, functional testing, and lubrication as necessary. Timely inspections help prevent minor issues from escalating into major problems.
How to Move a Quickmaster QM 46/2
Moving a Quickmaster QM 46/2 printing press is no small task. However, with the proper equipment and planning, it can be done safely and efficiently. Here are the steps on how to move a Quickmaster QM 46/2:
1. Gather the necessary equipment. You will need a forklift, a pallet jack, and a team of movers.
2. Prepare the press for moving. Turn off the press and unplug it from the power source. Lower the print bed and lock it in place. Remove any loose parts from the press.
3. Position the forklift. The forklift should be positioned in front of the press, with the forks aligned with the base of the press.
4. Lift the press. Slowly lift the press using the forklift. Be sure to keep the press level as you lift it.
5. Move the press. Once the press is lifted, move it to its new location. Be sure to move the press slowly and carefully.
6. Lower the press. Once the press is in its new location, slowly lower it using the forklift. Be sure to keep the press level as you lower it.
7. Secure the press. Once the press is lowered, secure it in place using the forklift or pallet jack.
People Also Ask
How much does a Quickmaster QM 46/2 weigh?
The Quickmaster QM 46/2 weighs approximately 6,000 pounds.
How many people are needed to move a Quickmaster QM 46/2?
It is recommended that at least four people be present to move a Quickmaster QM 46/2.
What is the best way to move a Quickmaster QM 46/2?
The best way to move a Quickmaster QM 46/2 is to use a forklift. However, if a forklift is not available, a pallet jack can also be used.
