5 Easy Steps to Remove a Dell Monitor Stand

Unveiling the secrets of effortless removal, this guide empowers you to liberate your Dell monitor from the clutches of its stand. Embark on a journey of liberation, as we unravel the intricacies of detaching your monitor with finesse and precision. Whether you’re embarking on a new ergonomic setup or simply seeking to enhance your workspace, this comprehensive guide will illuminate the path to a seamlessly detached monitor.

Commencing with the preparation phase, meticulously gather the necessary tools — a thin, non-metallic object (such as a credit card) and a Phillips screwdriver. These humble instruments will serve as your trusty companions throughout the disassembly process. Locate the small, concealed button situated at the base of the stand, beneath the monitor. This pivotal button holds the key to releasing the monitor from its current predicament.

With steady hands, gently insert the thin object into the designated slot, applying gentle pressure to depress the button. Simultaneously, grasp the stand firmly and pull it upwards, exerting a steady force. As the stand gracefully detaches from the monitor, proceed to remove the four screws securing the base of the stand using the Phillips screwdriver. With the screws removed, the base of the stand will effortlessly detach, leaving your monitor free to soar to new heights of ergonomic bliss.

Detaching the Stand Base

Depending on your Dell monitor model, its stand might be connected to the monitor’s base in different ways. Here are the general steps for detaching the stand base for the most common types of Dell monitors:

For monitors with a snap-on stand base:

1. Grip the monitor stand firmly with both hands and pull it straight up from the base, applying moderate force.
2. If the stand doesn’t detach easily, gently twist it from side to side while pulling it up.
3. Once the stand is detached, set it aside in a safe place.

For monitors with a screw-on stand base:

1. Locate the screw or screws that are securing the stand to the base.
2. Using a Phillips head screwdriver, unscrew the screws completely.
3. Once the screws are removed, lift the stand straight up from the base.

Important Safety Precautions:

• Before detaching the stand, make sure the monitor is powered off and unplugged from the power outlet.
• Handle the monitor and stand with care to avoid damage or injury.
• If you encounter any difficulty detaching the stand, refer to the user manual for your specific Dell monitor model or contact Dell customer support for assistance.

Separating the Monitor Panel

To separate the monitor panel from the stand, follow these steps:

1. Unplug the monitor

   Unplug the power cable and any other cables connected to the monitor.

2. Place the monitor face down on a soft surface

   Gently place the monitor face down on a soft surface, such as a blanket or towel, to protect the screen from scratches or damage. Ensure that the surface is clean and free of any debris.

3. Locate the release button or lever

   Depending on the model of your Dell monitor, the release button or lever may be located in different positions. It is typically situated at the back or bottom of the monitor stand. Refer to your monitor’s user manual or online documentation for the specific location.

4. Press the release button or lever

   Press and hold the release button or lever while gently lifting the monitor panel away from the stand. Apply steady and even pressure to avoid damaging the panel or stand.

5. Lift the monitor panel

   Once the release button or lever is depressed, carefully lift the monitor panel upwards and away from the stand. Do not pull or jerk the panel as this could cause damage to the monitor or its components.

6. Set the monitor panel aside

   Once the monitor panel is detached, set it aside in a safe and stable location. Ensure that the screen is protected from scratches or impacts.

Removing the Stand Column

To remove the stand column, follow these steps:

1. Lay the monitor face down on a soft, clean surface.
2. Locate the release lever at the bottom of the stand column.
3. Press the release lever and hold it while lifting the stand column away from the monitor.

Additional Details:

When pressing the release lever, ensure you apply firm pressure to fully disengage the locking mechanism.
If the lever is not pressed down completely, the stand column may not release smoothly. Additionally, some Dell monitor models may feature a slightly different release mechanism. If you encounter any difficulties, consult the specific user manual for your monitor.

Once the release lever is pressed, gently lift the stand column straight up to detach it from the monitor. Avoid applying excessive force or twisting the column, as this could damage the monitor or the stand column.

Disassembling the Stand Base

The stand base is typically a heavy and awkward part to remove, so it’s important to be careful not to drop it or damage yourself. Begin by disconnecting the monitor from the power outlet and placing it on a soft, flat surface.

Depending on the model of your Dell monitor, there might be a release button or latch on the back of the stand base. If there is, press it and lift the monitor off the stand.

If there is no release button or latch, you will need to remove the screws that are holding the stand base in place. These screws are usually located on the bottom of the stand base. Use a screwdriver to remove the screws, and then lift the monitor off the stand.

Once the monitor is removed, you can disassemble the stand base by following these steps:

1. Remove the screws that connect the base to the upright.
2. Lift the upright off the base.
3. Remove the screws that connect the pedestal to the base.
4. Lift the pedestal off the base.
5. Remove the screws that connect the VESA mount to the back of the monitor.
6. Lift the VESA mount off the monitor.

Now that the stand base is disassembled, you can store it for later use or dispose of it properly.

Releasing the Quick Release Mechanism

Most Dell monitors come with a quick release mechanism that allows you to easily detach the stand from the monitor without the need for any tools.

To release the quick release mechanism, follow these steps:

1. Locate the Quick Release Button

The quick release button is typically located on the back of the monitor, near the base of the stand.

2. Press and Hold the Button

Press and hold the quick release button while simultaneously lifting the monitor up and away from the stand.

3. Slide the Monitor Upwards

Once the quick release button is pressed, slide the monitor upwards until it is completely detached from the stand.

4. Lift the Monitor Off the Stand

Once the monitor is detached, carefully lift it off the stand.

5. Inspect the Stand and Monitor

Before reattaching the stand to the monitor, inspect both the stand and the monitor for any damage. If you find any damage, do not attempt to reattach the stand and contact Dell support for assistance.

Dell Monitor Models	Quick Release Mechanism Location
Dell S2719DGF	Back of the monitor, near the base of the stand
Dell U2419H	Back of the monitor, on the bottom edge
Dell P2419H	Back of the monitor, near the center

Unlocking the Stand Arm

Unlocking the stand arm of your Dell monitor is a critical step before you can remove it. Dell monitors feature different types of stand arms, depending on the model. Here’s a detailed guide on how to unlock the stand arm for different Dell monitor models:

Type 1: Quick-Release Stand Arm

1.Locate the small lever or button on the back of the monitor’s stand arm.
2. Press and hold the lever or button.
3. While pressing the button, lift the monitor up and off the stand arm.

Type 2: Screw-in Stand Arm

1.Check for a screw at the base of the stand arm where it connects to the monitor’s back panel.
2.Using a screwdriver, unscrew it until you can separate the stand arm and monitor.

Type 3: Built-in Stand

For monitors with built-in stands, you cannot separate the stand from the monitor. However, you can adjust it to different heights and angles to suit your needs.

Refer to the table below for a summary of unlocking methods for different Dell monitor stand types:

Separating the Stand Assembly

To remove the stand from your Dell monitor, you will need to follow these steps:

1. Place the monitor face down on a soft, clean surface to protect the screen from scratches.
2. Locate the release button on the back of the stand.
3. Press and hold the release button while lifting the stand away from the monitor.
4. Once the stand is detached, you can remove the base by unscrewing the screws that hold it in place.
5. The monitor can now be used without the stand.

Here is a more detailed explanation of step 7:

To remove the base from the stand, locate the screws that hold it in place. The screws are typically located on the bottom of the base. Use a Phillips head screwdriver to loosen the screws.

Once the screws are loose, you can remove the base from the stand. To do this, simply lift the base straight up away from the stand.

The monitor can now be used without the stand.

Preparing Your Workspace

Before beginning, gather necessary tools and materials. You will need:

• Soft, clean cloth or microfiber
• Phillips screwdriver (optional)

Removing the Stand

1. Locate the Release Buttons: Identify the small release buttons on the base of the monitor stand. They are usually located on the right and left sides.
2. Simultaneously Press Release Buttons: Simultaneously press and hold both release buttons firmly.
3. Lift the Monitor Upward: Gently lift the monitor straight upward to disengage it from the stand. Do not pull or tilt the monitor.
4. Store the Stand Safely: Place the stand in a safe location to prevent accidental damage.

Cleaning the Monitor and Stand

5. Wipe the Monitor: Use the soft cloth or microfiber to gently wipe down the monitor screen to remove any dust or debris. Avoid using harsh chemicals or abrasive cloths.
6. Clean the Stand: Similarly, wipe the stand with the cloth or microfiber to remove dust and smudges. You can use a slightly damp cloth if needed.

Reattaching the Stand to the Monitor

Reattaching the Stand to the Monitor

7. Align the Monitor Arm: Position the monitor arm on the base of the stand, ensuring the alignment marks are aligned.

8. Insert the Monitor Arm: Carefully insert the monitor arm into the base, applying gentle pressure. Ensure it is inserted securely.

• For Monitors with a Removable Arm: If your monitor has a removable arm, align the arm with the monitor and slide it into place. Tighten the screws at the back of the monitor to secure the arm.
• For Monitors with an Integrated Arm: Slide the monitor onto the integrated arm, making sure the alignment marks match. Gently push the monitor down to engage the lock.

9. Check for Stability: Gently adjust the monitor’s position and angle to ensure it is stable and secure.

Aligning the Monitor Panel

To align the monitor panel, follow these steps:

1. Lay the monitor face down on a soft cloth or towel to protect the screen.
2. Locate the two screws on the back of the monitor that secure the stand to the panel.
3. Using a screwdriver, remove the screws.
4. Gently lift the stand away from the panel.
5. Align the panel with the desired position on the stand.
6. Reposition the stand over the panel and align the screw holes.
7. Insert the screws and tighten them until snug.
8. Turn the monitor upright and adjust the stand to the desired height and tilt.
9. Check if the monitor panel is aligned properly. If not, repeat steps 4-8 until the alignment is satisfactory.

Additional Tips for Aligning the Monitor Panel

• Use a level to ensure the monitor panel is horizontal.
• Adjust the stand height so that the top of the panel is at eye level when you are sitting in your chair.
• Tilt the stand to the desired angle to reduce glare and improve viewing comfort.

Tightening the Stand Screws

Once you’ve identified the screws that secure the stand, it’s time to tighten them to the appropriate torque. This will ensure a secure fit between the stand and the monitor without overtightening or damaging the screws.

Here’s a step-by-step guide to tightening the stand screws:

1. Gather the necessary tools. You’ll need a Phillips head screwdriver in the appropriate size.
2. Locate the screws. The stand screws are typically located on the bottom of the monitor.
3. Use the appropriate screwdriver. Use a Phillips head screwdriver that fits snugly into the screw head.
4. Tighten the screws. Apply gentle but firm pressure to tighten the screws.
5. Avoid overtightening. Tighten the screws until they are snug, but avoid overtightening as this can damage the screws or the monitor.
6. Test the stand. Once you’ve tightened the screws, gently lift the monitor by the stand to make sure it is secure.
7. Additional tips:

Stand Arm Type	Unlocking Method
Quick-Release Button	Press and hold button
Phillips Screw	Unscrew the screw
Built-in stand	Not removable

Tip
Use a torque wrench with an inch-pound setting of 25-30 in-lb (2.8-3.4 N⋅m) for optimal tightening.
Apply thread locker to the screws for added security.
If the screws are rusted or damaged, replace them with new ones.
Never force the screws, as this can damage the monitor or the screws.

How To Remove Dell Monitor Stand

To remove the stand from your Dell monitor, follow these steps:

1. Lay the monitor face down on a soft, clean surface.

2. Locate the release button on the back of the stand. It is usually located near the base of the stand.

3. Press and hold the release button while pulling the stand straight up.

4. Once the stand is removed, you can store it or dispose of it properly.

People Also Ask About How To Remove Dell Monitor Stand

Do I need any tools to remove the stand?

No, you do not need any tools to remove the stand from your Dell monitor.

Can I remove the stand if the monitor is mounted on the wall?

Yes, you can remove the stand even if the monitor is mounted on the wall. However, you may need to use a screwdriver to remove the screws that are holding the stand in place.

What should I do if I cannot remove the stand?

If you cannot remove the stand, you can try contacting Dell customer support for assistance.