If you want to relocate your Google Doorbell or replace it with a new one, unmount it from the wall. The process is very simple and straightforward, and in just a few minutes, you’ll have the device in your hands. Here’s a step-by-step guide to remove your Google Doorbell:
First, you need to power off the doorbell by removing it from its mounting plate. Press the doorbell button to activate the device. Once the light on the doorbell starts glowing, press and hold the small button on the bottom of the device for about 10 seconds until the light turns off. Now, the doorbell is powered off, and you can safely remove it from the wall. To do this, insert your fingernail or a small flat-head screwdriver into the small slot at the bottom of the doorbell and gently pry it off the plate.
After removing the doorbell, disconnect the wires from the device. There are two small screws on the back of the doorbell that secure the wires. Use a screwdriver to loosen the screws and then pull the wires out of the terminals. Once the wires are disconnected, you can discard the doorbell. If you are replacing the doorbell with a new one, follow the instructions that came with the new device to install it.
How to Remove a Google Doorbell
Removing a Google Doorbell is a relatively simple process that can be completed in a few minutes. Here are the steps on how to remove a Google Doorbell:
- Turn off the power to the doorbell. This can be done by flipping the breaker that powers the doorbell or by removing the fuse that powers the doorbell.
- Remove the faceplate of the doorbell. This can be done by unscrewing the screws that hold the faceplate in place.
- Disconnect the wires from the doorbell. There will be two wires connected to the doorbell, one for power and one for ground. Disconnect the wires by unscrewing the screws that hold the wires in place.
- Remove the doorbell from the wall. The doorbell will be held in place by two screws. Remove the screws and pull the doorbell away from the wall.
How to Remove a Google Doorbell without Turning Off the Power
If you do not want to turn off the power to the doorbell, you can remove it without turning off the power by following these steps:
- Use a non-conductive tool. When working with electricity, it is important to use a non-conductive tool to avoid getting shocked. A non-conductive tool is made of a material that does not conduct electricity, such as plastic or rubber.
- Disconnect the wires from the doorbell. There will be two wires connected to the doorbell, one for power and one for ground. Disconnect the wires by unscrewing the screws that hold the wires in place.
- Remove the doorbell from the wall. The doorbell will be held in place by two screws. Remove the screws and pull the doorbell away from the wall.
People Also Ask
How do I reset my Google Doorbell?
To reset your Google Doorbell, press and hold the reset button on the back of the doorbell for 10 seconds. The doorbell will then reboot and be reset to factory settings.
How do I change the battery in my Google Doorbell?
To change the battery in your Google Doorbell, remove the faceplate of the doorbell and locate the battery compartment. Open the battery compartment and replace the old battery with a new one. Close the battery compartment and reattach the faceplate to the doorbell.
How do I troubleshoot my Google Doorbell?
If you are having trouble with your Google Doorbell, you can troubleshoot the problem by following these steps:
- Check the power to the doorbell.
- Check the wiring to the doorbell.
- Reset the doorbell.
- Contact Google support.
