8 Simple Steps to Remove Screen Cover From iPhone
Phones come with screen protectors to protect them from damage. While screen protectors are very useful, it is also essential to know how to remove them. Removing the screen protector without damaging your phone’s screen can be challenging. To remove the screen cover from your iPhone, you will need a few tools, and the process will take a few minutes.
Before you start, gather the tools you will need. You will need a credit card or a plastic pry tool, a microfiber cloth, and some rubbing alcohol. Once you have your tools, you can begin the removal process. First, power off your iPhone. This will help prevent any damage to the phone’s screen. Next, use the credit card or pry tool to gently lift one corner of the screen protector. Once you have lifted one corner, you can use your fingers to peel off the rest of the screen protector. Be careful not to pull too hard, as you could damage the screen. If the screen protector is stuck, you can use the rubbing alcohol to help loosen it.
Once you have removed the screen protector, use the microfiber cloth to clean the screen. This will remove any fingerprints or smudges. Now that you have removed the screen protector, you can enjoy your phone’s screen without worrying about damage.
Gather Essential Tools
Before you begin the process of removing the screen cover from your iPhone, it is essential to gather the necessary tools to ensure a safe and effective procedure. These tools include:
-
iOpener: A heat-resistant tool used to soften the adhesive holding the screen cover in place.
– Instructions for use: Heat the iOpener in a microwave according to the manufacturer’s instructions. Once warm, apply the iOpener to the edges of the screen cover for several minutes to soften the adhesive. -
Plastic Spudger: A thin, flexible tool used to pry the screen cover loose from the device.
– To use, gently insert the spudger between the screen cover and the device frame. Work your way around the edges, carefully prying the screen cover loose without damaging any components. -
Screwdriver Kit: A set of different-sized screwdrivers used to remove the screws securing the screen cover to the device.
– Identify the correct screwdriver head for the screws used in your iPhone model. Gently remove all screws and set them aside in a safe place.
| Tool | Purpose |
|---|---|
| iOpener | Softens adhesive holding screen cover |
| Plastic Spudger | Pries screen cover loose |
| Screwdriver Kit | Removes screws securing screen cover |
Determine Your iPhone Model
Step 1: Check the Back of Your iPhone
Locate the back of your iPhone and look for the model number printed on the bottom. This number will typically start with an “A” followed by four numbers, such as “A1522.”
Step 2: Use the Settings App
Open the “Settings” app on your iPhone.
Navigate to “General” > “About.”
Scroll down to “Model Number” to find the exact model number of your iPhone.
Alternatively, you can enter your serial number at checkcoverage.apple.com to retrieve your iPhone model.
Step 3: Consult a Table or Website
If you cannot locate the model number on your iPhone, you can refer to the following table or visit the Apple Support website for assistance:
| Model Number | iPhone Model |
|---|---|
| A1522, A1524 | iPhone 6 |
| A1633, A1688 | iPhone 6 Plus |
| A1660, A1661 | iPhone 6S |
| A1723, A1724 | iPhone 6S Plus |
| A1863, A1864 | iPhone 7 |
| A1865, A1897 | iPhone 7 Plus |
Locate the Suction Cup Placement
Step 3: Position the Suction Cup
Once the suction cup is ready, it’s crucial to position it correctly. This step requires precision and care to avoid any damage to your iPhone or the screen protector. Here’s a detailed guide to help you achieve the optimal suction cup placement:
a. Identify the Screen Protector’s Edge
Start by finding the edge of your screen protector where you want to begin the removal process. Avoid placing the suction cup directly on the corner of the protector, as this can create too much tension and increase the risk of breakage.
b. Choose the Center Position
Locate the center of the edge you selected in step ‘a.’ This will be the ideal spot to place the suction cup as it distributes the force evenly and minimizes the risk of damage.
c. Position the Suction Cup Angle
When placing the suction cup, ensure it forms a 90-degree angle with the screen protector’s edge. Avoid laying it flat, as this can make it difficult to lift the protector. Instead, tilt the suction cup slightly back towards the center of the iPhone.
d. Apply Gentle Pressure
Once the suction cup is in the correct position, gently press down to form a secure seal between the cup and the screen protector. Apply enough pressure to create suction without being overzealous and potentially pushing the suction cup through the protector.
| Incorrect Placement | Correct Placement |
|---|---|
|
On a corner |
In the center of the edge |
|
Lying flat |
Tilted back towards the center |
|
Excessive pressure |
Gentle and sufficient pressure |
Use a Thin Pry Tool
Step 1: Gather Your Tools
Prepare a thin pry tool, such as a metal spudger or a thin plastic card like an old gift card or credit card. Ensure that the tool is not sharp to avoid scratching the screen.
Step 2: Insert the Tool
Identify the gap between the screen cover and the iPhone’s frame. Carefully insert the thin pry tool into the gap, starting from one corner. Avoid applying excessive force or prying too quickly.
Step 3: Work the Tool Around
Gently slide the pry tool along the edge of the screen cover, moving it cautiously and steadily. Use a firm but delicate touch to separate the adhesive. Be patient and work gradually to minimize the risk of damaging the screen.
Step 4: Lift the Screen Cover
Once the pry tool has loosened the adhesive sufficiently, slowly raise the screen cover using the tool as a lever. Be mindful not to lift it too quickly or too far to prevent bending or cracking the screen.
Step 5: Inspect the Adhesive
After lifting the screen cover, examine the adhesive for any remaining residue. If there is any sticky residue left on either the screen cover or the iPhone, use a soft cloth dampened with isopropyl alcohol (90% or higher) to gently wipe it away. Do not use excessive moisture or cleaning agents that may damage the screen or the adhesive.
| Tool | Description |
|---|---|
| Metal spudger | A thin, flat metal tool designed for prying components apart. |
| Plastic card | An old gift card or credit card can be repurposed as a thin pry tool. |
| Isopropyl alcohol (90% or higher) | A cleaning agent used to remove adhesive residue. |
Remove the Screen Connector Cable
The screen connector cable is a delicate component that connects the display to the logic board. To remove it safely, you will need to use a special tool called a spudger or a suction cup.
Follow these steps to remove the screen connector cable:
- Power off your iPhone and remove the two screws at the bottom of the device.
- Use a spudger or suction cup to gently lift the screen from the frame.
- Be careful not to damage the screen or the digitizer.
- Once the screen is lifted, locate the screen connector cable. It is usually located near the top of the logic board.
- Use a spudger or tweezers to gently pry the screen connector cable from its socket.
- Be careful not to bend or damage the cable.
- Once the screen connector cable is removed, you can proceed with the rest of the repair.
Additional tips:
- If you are having difficulty removing the screen connector cable, you can use a hair dryer to gently heat the adhesive around the cable. This will make it easier to remove.
- Be sure to keep track of the screws and other small parts as you remove them. You will need them to reassemble the device later.
Disconnect the Battery Cable
Disconnect the battery cable is a crucial step in removing the screen cover from your iPhone. This ensures that there is no power running to the device, which can prevent damage to the logic board and other components. To disconnect the battery cable, follow these detailed steps.
- Locate the battery connector on the logic board. It is typically a small, rectangular connector with a black or gray plastic housing.
- Use a spudger or plastic opening tool to gently pry up the battery connector from the socket on the logic board. Be careful not to damage the connector or the logic board.
- Once the connector is loose, pull it straight up to disconnect the battery cable.
- Set the disconnected battery cable aside in a safe place, making sure it does not come into contact with any metal objects.
- Double-check that the battery cable is fully disconnected by gently tugging on it.
- If the battery cable is still connected, repeat steps 2-4 until it is completely disconnected.
- Dispose of the old battery cable properly according to local regulations.
Unscrew the Display Shield
Now that the display assembly is free from the phone, it’s time to remove the display shield. This is the metal plate that covers the display connectors and other components.
To remove the display shield, you will need a Phillips #000 screwdriver.
- Locate the two screws that secure the display shield. They are located on the bottom edge of the shield, near the center.
- Use the screwdriver to remove the screws. Be careful not to strip the screws.
- Once the screws are removed, lift the display shield up and off of the phone. Be careful not to damage the display connectors or other components.
Once the display shield is removed, you will have access to the display connectors. You can now disconnect the display and remove it from the phone.
Lift the Screen Assembly
Once the screws are removed, you can lift the screen assembly from the phone. Be careful not to pull on the cables that connect the screen to the phone’s motherboard. Use a plastic spudger to gently pry up the screen assembly from the phone’s frame. Once the screen assembly is lifted, you can disconnect the cables that connect it to the phone’s motherboard and remove the screen assembly from the phone.
Disconnect the LCD Connector
Use a spudger or your fingernail to gently disconnect the LCD connector. The LCD connector is located at the bottom of the screen assembly, near the power button. Be careful not to damage the LCD connector.
Disconnect the Digitizer Connector
Use a spudger or your fingernail to gently disconnect the digitizer connector. The digitizer connector is located at the top of the screen assembly, near the earpiece speaker. Be careful not to damage the digitizer connector.
Disconnect the Home Button Cable
Use a spudger or your fingernail to gently disconnect the home button cable. The home button cable is located at the bottom of the screen assembly, near the dock connector port. Be careful not to damage the home button cable.
Remove the Screen Assembly
Once all of the cables are disconnected, you can remove the screen assembly from the phone. Be careful not to damage the screen assembly or the phone’s frame.
| Step | Description |
|---|---|
| 1 | Power off your iPhone. |
| 2 | Remove the two screws at the bottom of the iPhone. |
| 3 | Use a suction cup to lift the screen assembly from the phone. |
| 4 | Disconnect the LCD connector. |
| 5 | Disconnect the digitizer connector. |
| 6 | Disconnect the home button cable. |
| 7 | Remove the screen assembly from the phone. |
Clean the Surface
1. Power off your iPhone, then lay it down on a flat surface.
2. Wipe down the screen with a soft, lint-free cloth to remove any dust or debris.
3. Use a cotton swab dipped in isopropyl alcohol to clean the edges of the screen, where dirt and grime can accumulate.
4. Rinse the cotton swab with water and wipe down the screen again to remove any remaining alcohol.
5. Allow the screen to dry completely.
Reassemble
1. Align the screen cover with the edges of your iPhone.
2. Carefully press down on the screen cover, starting from the center and working your way outward.
3. Ensure that the screen cover is firmly attached to your iPhone.
4. Turn on your iPhone and test the screen to ensure that it is functioning properly.
5. If you notice any air bubbles below the screen cover, gently press down on the bubble to remove the air.
Additional Tips for Reassembly
| Tip | Description |
|---|---|
| Use a credit card or plastic card | To help press down on the screen cover and remove any air bubbles. |
| Apply a small amount of heat | To help the screen cover adhere to your iPhone. |
| Wait 24 hours before using your iPhone | To allow the adhesive to fully bond. |
How To Remove Screen Cover From iPhone
Removing the screen cover from your iPhone is a simple process that can be done in just a few minutes. By following these steps, you can remove your screen cover without damaging your phone.
- Locate the small indentation at the bottom of the screen protector. This indentation is usually located in the center of the screen protector, just above the Home button.
- Insert your fingernail or a thin object (such as a guitar pick) into the indentation and gently pry upwards. The screen protector should begin to peel away from the screen.
- Continue peeling the screen protector away from the screen until it is completely removed.
If you are having trouble removing the screen protector, you can try using a hairdryer to warm up the adhesive. Once the adhesive is warm, the screen protector should be easier to remove.
People Also Ask
How do I remove a glass screen protector from my iPhone?
To remove a glass screen protector from your iPhone, follow the steps outlined above. However, you may need to use a little more force to remove a glass screen protector, as the adhesive is typically stronger.
How do I remove a cracked screen protector from my iPhone?
To remove a cracked screen protector from your iPhone, follow the steps outlined above. However, you may need to be more careful when removing a cracked screen protector, as the glass may be sharp.
How do I remove a screen protector from my iPhone without damaging the screen?
To remove a screen protector from your iPhone without damaging the screen, follow the steps outlined above. Be sure to use caution when removing the screen protector, as the adhesive may be strong.
