How to Set the Clock on a Harley-Davidson Touring Motorcycle
Setting the time on a Harley-Davidson Touring motorcycle is an easy task that can be completed in just a few minutes.
First, locate the clock button on the left-hand side of the instrument cluster. The clock button is typically a small, round button with a clock symbol on it. Once you have located the clock button, press and hold it until the hour digits on the clock begin to flash. Use the up and down buttons on the instrument cluster to change the hour digits to the correct time. Once the hour digits are set correctly, release the clock button.
Next, the minute digits on the clock will begin to flash. Use the up and down buttons on the instrument cluster to change the minute digits to the correct time. Once the minute digits are set correctly, press the clock button again to save the time and exit the clock setting mode.
Pre-Preparation: Gather Necessary Tools and Materials
Tools and Materials Required:
To successfully set the clock on your Harley Touring motorcycle, you’ll need the following tools and materials:
1. Phillips head screwdriver:
Ensure you have a Phillips head screwdriver that fits snugly into the clock’s adjustment screws. A loose-fitting screwdriver can damage the screws and make it difficult to adjust the clock accurately.
2. Flathead screwdriver:
A flathead screwdriver is essential for prying open the clock’s faceplate. Be gentle and avoid using excessive force to prevent damaging the plastic housing.
3. 12-volt battery:
A fully charged 12-volt battery is required to power the clock during the adjustment process. Ensure the battery is connected to the motorcycle’s electrical system before starting the procedure.
4. Clock adjustment knob:
Most Harley Touring clocks come with a dedicated adjustment knob. Familiarize yourself with its location and function before proceeding.
5. Flashlight or work light:
Adequate lighting is crucial for visibility, especially if working in a dimly lit area. A flashlight or work light will help you see the clock’s dials and controls clearly.
6. Clock faceplate:
Some models may require removing the clock faceplate for adjustment. Carefully pry off the faceplate using a flathead screwdriver, taking care not to damage the surrounding plastic.
Accessing the Clock
Accessing the clock on a Harley Touring motorcycle is simple and can be done in just a few steps:
1. Locate the Clock on the Instrument Cluster
The clock is typically located within the instrument cluster, which is the digital display that provides various information to the rider. It is usually displayed in the lower right corner of the cluster.
2. Navigate through the Menu Options
To access the clock settings, navigate through the menu options using the control buttons on the left handlebar. Press the “Mode” button repeatedly until you reach the “Clock” menu. Alternatively, you can use the up and down arrow buttons to scroll through the options until you find “Clock”.
3. Adjust the Clock Settings
Once in the “Clock” menu, use the up and down arrow buttons to adjust the hour and minute settings. The 24-hour format indicates the time in military time (e.g., 18:00 for 6:00 PM), while the 12-hour format uses AM/PM. To toggle between these formats, press the “Mode” button.
To set the time, follow these steps:
| Step | Action |
|---|---|
| 1 | Use the up or down arrow buttons to select the hour. |
| 2 | Press the “Mode” button to switch between 12- and 24-hour formats. |
| 3 | Use the up or down arrow buttons to select the minute. |
| 4 | Press the “Mode” button to confirm the settings. |
Setting the Time Manually
To set the time manually on your Harley Touring motorcycle, follow these steps:
- Turn the ignition switch to the “On” position.
- Locate the “Time Set” button on the left-hand side of the instrument cluster.
- Press and hold the “Time Set” button for three seconds. The clock will start flashing.
- Use the up and down arrows on the left-hand side of the instrument cluster to adjust the hour.
- Press the “Time Set” button again to save your changes.
Additional Instructions for the Third Step
When you press and hold the “Time Set” button for three seconds, the clock will start flashing. The hours will be displayed in the top line of the display, and the minutes will be displayed in the bottom line. To adjust the hours, press the up or down arrow on the left-hand side of the instrument cluster. Each press of the up arrow will increase the hour by one, and each press of the down arrow will decrease the hour by one. To adjust the minutes, press the left or right arrow on the left-hand side of the instrument cluster. Each press of the left arrow will decrease the minutes by one, and each press of the right arrow will increase the minutes by one. Once you have set the time to your desired time, press the “Time Set” button again to save your changes.
The clock on your Harley Touring motorcycle is a 12-hour clock, so you will need to set the time to either AM or PM. To set the time to AM, press the “AM” button on the left-hand side of the instrument cluster. To set the time to PM, press the “PM” button on the left-hand side of the instrument cluster.
| Button | Function |
|---|---|
| Time Set | Press and hold to set the time |
| Up Arrow | Increase the hours |
| Down Arrow | Decrease the hours |
| Left Arrow | Decrease the minutes |
| Right Arrow | Increase the minutes |
| AM | Set the time to AM |
| PM | Set the time to PM |
Synchronizing with Electronic Fuel Injection (EFI)
If your Harley Touring is equipped with electronic fuel injection (EFI), the throttle bodies will need to be synchronized to ensure optimal performance. You can do this using a Twin Max synchronizer or other similar tool.
Here are the steps on how to synchronize your EFI Harley Touring:
-
Start your motorcycle and let it idle for a few minutes to warm up.
-
Connect the Twin Max synchronizer to the throttle bodies.
-
Adjust the idle speed to the specified RPM for your motorcycle model.
-
Using the Twin Max synchronizer, adjust the throttle stop screws on each throttle body until the vacuum readings on the synchronizer are equal. This may take several iterations of adjusting the screws and checking the vacuum readings.
-
Once the throttle bodies are synchronized, turn off your motorcycle and disconnect the Twin Max synchronizer.
Calibrating the Clock Using a Scan Tool
To calibrate the clock using a scan tool, you will need to follow these steps:
- Connect the scan tool to the diagnostic port of your motorcycle.
- Turn on the ignition key to the “ON” position.
- Select the “Modules” option on the scan tool and locate the “Instrument Panel” module.
- Enter the “Configuration” or “Settings” menu within the “Instrument Panel” module.
- Look for the “Clock Calibration” option and select it. A
tag can be used here to format it like this:
Step Action 1 Connect the scan tool to the diagnostic port of your motorcycle. 2 Turn on the ignition key to the “ON” position. 3 Select the “Modules” option on the scan tool and locate the “Instrument Panel” module. 4 Enter the “Configuration” or “Settings” menu within the “Instrument Panel” module. 5 Look for the “Clock Calibration” option and select it. Maintaining Clock’s Reliability and Precision
To keep your Harley Touring clock operating reliably and accurately, certain precautions should be observed:
1. Avoid Extreme Temperatures: Exposure to extreme heat or cold can affect the clock’s operation and precision. Protect the clock from direct sunlight and prolonged exposure to extreme temperatures.
2. Handle with Care: Treat the clock with care to prevent any accidental damage or shocks that could compromise its precision.
3. Install Securely: Ensure the clock is securely mounted to prevent vibrations or loose connections that could impact its accuracy.
4. Keep Clean: Dust and debris can accumulate over time and interfere with the clock’s functionality. Regularly clean the clock using a soft cloth or brush.
5. Use High-Quality Batteries: Employ certified and fresh batteries to provide consistent power and maintain the clock’s accuracy.
6. Calibrate Regularly: Periodically compare the clock’s time with a reliable reference, such as an atomic clock or a smartphone, and make any necessary adjustments to ensure accuracy.
7. Monitor Electrical Connections: Inspect the electrical connections to the clock regularly for any signs of corrosion or loose wires. Secure connections and clean any corrosion to prevent potential malfunctions.
8. Troubleshooting: If the clock is exhibiting inaccuracies or malfunctions, follow these steps:
Troubleshooting Guide
Issue Possible Causes Solutions Clock loses time Weak or exhausted batteries
Loose connectionsReplace batteries
Check and tighten connectionsClock gains time Battery overcharge Check battery voltage
Install a voltage regulatorClock erratic Battery degradation
Electrical interference
Clock malfunctionReplace battery
Identify and eliminate interference
Consider professional repairAdvanced Clock Settings: Clock Reset and Recall
The advanced clock settings allow you to easily reset or recall the clock’s settings, ensuring accuracy and convenience.
Clock Reset
To reset the clock, follow these simple steps:
- Press and hold the “MODE” button for at least five seconds.
- The display will show “CLOCK RESET?”
- Press the “ENTER” button to confirm the reset.
- The clock will be reset to the default time and settings.
Clock Recall
To recall a previously saved clock setting, follow these steps:
- Press and hold the “RECALL” button for at least three seconds.
- The display will show “CLOCK RECALL?”
- Press the “ENTER” button to confirm the recall.
- The clock will be restored to the last saved setting.
The clock recall feature is particularly useful if you accidentally change the clock settings or if you want to switch between multiple clock configurations.
Recommended Time Setting for Harley Touring
The optimal time setting for a Harley Touring motorcycle depends on your riding style and preferences. However, here are some general recommendations:
Riding Style Time Setting Cruising 12-14 minutes ahead Aggressive Riding 8-10 minutes ahead Long Distance Riding 15-18 minutes ahead These recommendations aim to provide a balance between accuracy and visibility while minimizing eye strain and distraction. Remember, adjusting the clock settings while riding is not recommended for safety reasons.
Best Practices
1. Ensure that the bike is in a safe and stable position before attempting to set the clock.
2. Locate the clock button, typically found on the left side of the handlebar.
3. Press and hold the clock button for approximately 5 seconds to enter the clock setting mode.
4. Use the up and down buttons on the handlebar to adjust the hour and minute values.
5. Press and hold the clock button again for 3 seconds to save the changes and exit the setting mode.
6. Verify the clock time by pressing the clock button once to display the current time.
Precautionary Measures
7. Do not attempt to set the clock while riding the bike, as it can be distracting and dangerous.
8. Use caution when pressing the clock button, as it is sensitive and can be accidentally activated.
9. Ensure that the clock button is not accidentally pressed during normal operation, as it can reset the clock to its default value.
10. In the event of a power loss or battery replacement, the clock will need to be reset. Refer to the bike’s user manual for specific instructions on resetting the clock after a power failure.
Power Loss Event Clock Reset Method Battery Replacement Refer to bike’s user manual Power Interruption Press and hold the clock button for 5 seconds How to Set the Clock on a Harley Touring Motorcycle
Setting the clock on a Harley Touring motorcycle is a simple process that can be completed in a few minutes. Here are the steps:
- Locate the “Clock” button on the left handlebar. It is typically located near the speedometer.
- Press and hold the “Clock” button for about 5 seconds. The time will start flashing.
- Use the “Up” and “Down” buttons on the left handlebar to adjust the hours. Press the “Up” button to increase the hours and the “Down” button to decrease the hours.
- Press the “Clock” button again to set the minutes. The minutes will start flashing.
- Use the “Up” and “Down” buttons to adjust the minutes. Press the “Up” button to increase the minutes and the “Down” button to decrease the minutes.
- Press the “Clock” button one final time to save the time.
The clock will now be set to the correct time.
People Also Ask
How do I reset the clock on my Harley?
To reset the clock on your Harley, follow the steps outlined above. Once you have set the time, press and hold the “Clock” button for about 5 seconds. The time will reset to 12:00 AM.
How do I change the time on my Harley Touring motorcycle?
To change the time on your Harley Touring motorcycle, follow the steps outlined above. Once you have set the time, press the “Clock” button one final time to save the time.
Where is the clock located on a Harley Touring motorcycle?
The clock is typically located on the left handlebar, near the speedometer.
