Reactor are a powerful machines in Skyfactory 4 that allow you to generate large amounts of power. They are essential for powering your base and your machines. Setting up a reactor can be a bit complex, but it’s definitely worth the effort. In this guide, we’ll walk you through the steps on how to set up a reactor in Skyfactory 4.
The first thing you need to do is craft a reactor. The recipe for a reactor is:
“`
8 Iron Ingots
1 Redstone Dust
1 Diamond
“`
Once you have crafted a reactor, you need to place it down. Reactors can be placed on the ground or on a pedestal. If you place a reactor on a pedestal, it will be more efficient.
Next, you need to connect the reactor to a power source. Reactors can be powered by any type of power source, but the most common power source is a generator. To connect a reactor to a generator, simply use a wire.
Finally, you need to add fuel to the reactor. Reactors can be fueled by any type of fuel, but the most common fuel is coal. To add fuel to a reactor, simply right-click on the reactor with the fuel in your hand.
Once you have added fuel to the reactor, it will start to generate power. The amount of power that a reactor generates depends on the type of fuel that you are using and the efficiency of the reactor. Reactors are a great way to generate large amounts of power. They are essential for powering your base and your machines. Setting up a reactor can be a bit complex, but it’s definitely worth the effort.
Installing the Draconic Reactor Mod
To set up a Draconic Reactor in Skyfactory 4, you will need to first install the Draconic Evolution mod. This mod adds the Draconic Reactor, as well as a variety of other powerful machines and items. To install the mod, follow these steps:
- Download the Draconic Evolution mod from CurseForge.
- Open your Minecraft launcher and select the “Forge” profile.
- Click on the “Mods” tab and then click on the “Open mods folder” button.
- Copy the Draconic Evolution mod file (.jar) into the mods folder.
- Start Minecraft and select the “Forge” profile.
- The Draconic Evolution mod will now be installed.
Once you have installed the Draconic Evolution mod, you can begin to build your Draconic Reactor.
Establishing the Reactor’s Energy Supply
Once the Reactor has been placed, you will need to establish its energy supply. The Reactor can generate power using various fuel sources, which can be divided into two main categories:
| Fuel Source | Generation Rate (RF/t) |
|---|---|
| Lava | 25,000 |
| Blaze Rods | 20,000 |
| Coal | 16,000 |
| Charcoal | 16,000 |
| Cactus | 10,000 |
| Compressed Cobblestone | 3,200 |
RF/t stands for “Redstone Flux per tick,” where a tick is a Minecraft game tick.
The most efficient fuel source for the Reactor is Lava, which can be obtained from Lava Lakes found in the Nether. Blaze Rods are also a good fuel source, as they can be obtained from Blaze Mobs in the Nether.
Once you have chosen a fuel source, you will need to insert it into the Reactor’s Fuel Slot. The Reactor can hold up to 8 fuel cells, and each fuel cell can hold up to 64 fuel items.
Once the fuel has been inserted, the Reactor will begin to generate power. The Reactor’s power output can be monitored using the Reactor GUI, which can be accessed by right-clicking on the Reactor.
Configuring the Reactor’s Interfaces
1. Steam Port
Configure the Steam Port to connect to the Steam Turbine or other steam-powered devices.
2. Fuel Port
Connect the Fuel Port to a tank or fluid source containing the fuel for the reactor.
3. Water Port
Connect the Water Port to a tank or fluid source containing water for cooling the reactor.
4. Control Port
The Control Port allows you to control the reactor using Redstone signals.
5. Data Port
The Data Port provides information about the reactor’s status and performance, including power generation and fuel levels.
6. Redstone Port
The Redstone Port emits a Redstone signal when the reactor is running.
7. Multiblock Interfaces
The Reactor is a multiblock structure. To configure its interfaces, right-click on the Reactor Core while holding a Configuration Tool. This will open the Reactor Interface Configuration GUI.
The GUI has 7 tabs, each corresponding to a different interface:
| Tab | Description |
|---|---|
| Steam | Configure the Steam Port |
| Fuel | Configure the Fuel Port |
| Water | Configure the Water Port |
| Control | Configure the Control Port |
| Data | Configure the Data Port |
| Redstone | Configure the Redstone Port |
| Multiblock | Configure the Multiblock Interfaces |
How To Set Up A Reactor Skyfactory 4
Reactors are a great way to generate large amounts of power in Skyfactory 4. They can be used to power machines, smelters, and other devices. To set up a reactor, you will need the following items:
- 1 Reactor
- 1 Energy Pylon
- 1 Energy Link
- 1 Fuel Source (such as Uranium, Plutonium, or Thorium)
Once you have gathered these items, you can begin setting up your reactor. First, place the reactor on the ground. Then, place the energy pylon next to the reactor. Next, place the energy link between the reactor and the energy pylon. Finally, place the fuel source inside the reactor.
Once your reactor is set up, you can begin generating power. To do this, simply right-click on the reactor and select “Start”. The reactor will now begin generating power, which will be sent to the energy pylon. You can then use the energy pylon to power your other devices.
People Also Ask
How do you make a reactor in Skyfactory 4?
To make a reactor in Skyfactory 4, you will need the following items:
1 x Reactor Housing
1 x Energy Pylon
1 x Energy Link
1 x Fuel Source (such as Uranium, Plutonium, or Thorium)
How do you start a reactor in Skyfactory 4?
To start a reactor in Skyfactory 4, simply right-click on the reactor and select “Start”. The reactor will now begin generating power, which will be sent to the energy pylon. You can then use the energy pylon to power your other devices.
How do you get fuel for a reactor in Skyfactory 4?
To get fuel for a reactor in Skyfactory 4, you can either mine it or create it. Uranium can be found in the Overworld, while Plutonium and Thorium can be found in the Nether. You can also create fuel by using the Uranium Centrifuge or the Plutonium Breeder.
