Quilting is a beautiful and rewarding craft, and adding the binding is the final touch that brings it all together. But if you’ve never sewn on quilt binding before, it can seem like a daunting task. Don’t worry, though! With a little patience and the right instructions, you can easily master this essential quilting skill.
Before you start, it’s important to gather your materials. You’ll need:
– Quilt binding strips
– Matching thread
– Sewing machine
– Iron and ironing board
– Scissors
– Measuring tape or ruler
– Pins
Once you have your materials, you’re ready to start sewing! Begin by measuring and cutting your binding strips to the desired length. The length of each strip will vary depending on the size of your quilt, so be sure to measure carefully. Once you have cut your strips, join them together using a diagonal seam. Press the seam open and then fold the binding strip in half lengthwise, pressing the fold. Now you’re ready to sew the binding to your quilt.
Secure the Binding
6. Trim the Excess Binding and Press:
• Trim the excess binding to 1/2 inch from the corner.
• Turn the binding to the back of the quilt and press it flat.
• Fold the binding over the quilt edge and press it again.
• Mitre the corners by folding one side of the binding over the other at a 45-degree angle.
• Trim the excess binding and press the corner flat.
• Repeat for all four corners.
• Top-stitch the binding to the quilt by sewing a straight line close to the folded edge.
• Use a small stitch length and a machine needle that is appropriate for the fabric.
• Start and stop stitching 1/2 inch from the corner.
• Secure the threads by backstitching or tying them off.
Finishing Touches:
• Trim any loose threads.
• Wash and dry the quilt to soften the binding and give it a finished look.
Trim and Finish the Binding
Now that your binding is sewn on, it’s time to trim and finish it. Here are the steps:
Trim the Binding
Use sharp scissors to trim the excess binding from the corners. Be careful not to cut into the quilt top.
Fold the Binding over the Edges
Fold the binding over the raw edges of the quilt top and press it down. Use a binding clip or pin to hold the binding in place.
Miter the Corners
To create a professional-looking finish, miter the corners of the binding. Here’s how:
- Fold the binding over the corner and crease it.
- Unfold the binding and trim the excess at a 45-degree angle.
- Refold the binding and press it down.
Secure the Binding
Now it’s time to secure the binding to the quilt. You can do this by hand or machine.
By Hand
Use a needle and thread to whip stitch the binding to the quilt top. Start in the middle of one side and work your way around the quilt.
By Machine
If you have a sewing machine with a walking foot, you can use it to machine-stitch the binding to the quilt top. This is a faster and easier method than hand-stitching.
Finishing Touches
Once the binding is secured, you can add finishing touches such as quilting or embellishments. This is optional, but it can give your quilt a more polished look.
How to Sew On Quilt Binding
Quilt binding is the final step in the quilting process, and it serves two purposes: to secure the edges of the quilt and to give it a finished look. There are several different ways to sew on quilt binding, but the most common method is to use a blind stitch. This stitch is invisible from the front of the quilt, and it creates a strong and secure bond.
To sew on quilt binding, you will need the following supplies:
*
- Quilt binding
- Quilting thread
- Sewing machine
- Blind stitch foot (optional)
If you are using a blind stitch foot, attach it to your sewing machine according to the manufacturer’s instructions. If you are not using a blind stitch foot, you can still sew on quilt binding using a regular sewing foot. However, the blind stitch will be more difficult to see and may not be as strong.
To begin, fold the quilt binding over the edge of the quilt, right sides together. Stitch the binding in place, using a blind stitch or a regular stitch. Be careful not to stitch too close to the edge of the quilt, as this can cause the fabric to fray.
Once the binding is stitched in place, turn it to the back of the quilt and press it flat. Fold the binding over the edge of the quilt again, wrong sides together. Stitch the binding in place again, using a blind stitch or a regular stitch. This time, stitch close to the edge of the quilt to secure the binding.
Your quilt binding is now complete! Enjoy your beautiful finished quilt!
People Also Ask About How to Sew On Quilt Binding
What is the best way to sew on quilt binding?
The best way to sew on quilt binding is to use a blind stitch. This stitch is invisible from the front of the quilt, and it creates a strong and secure bond.
Can I use a regular sewing machine to sew on quilt binding?
Yes, you can use a regular sewing machine to sew on quilt binding. However, the blind stitch will be more difficult to see and may not be as strong.
How do I miter the corners of my quilt binding?
To miter the corners of your quilt binding, follow these steps:
- Fold the binding in half at the corner, wrong sides together.
- Press the fold flat.
- Unfold the binding and fold it in half again, this time right sides together.
- Press the fold flat.
- Stitch the binding in place, using a blind stitch or a regular stitch.
- Trim the excess binding.
