If you’re looking to get a little extra performance out of your RX 590 Fatboy without spending any money, undervolting is a great option. Undervolting is the process of reducing the amount of voltage that your GPU receives. This can lead to lower power consumption, lower temperatures, and in some cases, a slight performance increase. However, it’s important to note that undervolting can also lead to instability if you’re not careful. So, if you’re not comfortable with tweaking your GPU’s settings, it’s best to leave it alone.
To undervolt your RX 590 Fatboy, you’ll need to use a software program like MSI Afterburner or Sapphire Trixx. Once you’ve installed the software, open it up and look for the voltage-frequency curve. This curve will show you the relationship between the voltage and frequency of your GPU. To undervolt your GPU, you’ll need to lower the voltage at each frequency point. However, you don’t want to lower the voltage too much, or you’ll start to experience instability. A good rule of thumb is to start by lowering the voltage by 5-10mV and then test your GPU’s stability. If your GPU is stable, you can lower the voltage by another 5-10mV and test again. Repeat this process until you find the lowest voltage that your GPU is stable at.
Once you’ve found the lowest stable voltage for your GPU, you can start to test for performance improvements. To do this, run a benchmark like 3DMark or Unigine Heaven. Once you’ve run the benchmark, compare your results to the results you got before you undervolted your GPU. If you’re lucky, you’ll see a slight performance increase. However, even if you don’t see a performance increase, you’ll still benefit from the lower power consumption and temperatures that undervolting provides.
How to Undervolt an RX 590 Fatboy
Undervolting is a process of reducing the voltage supplied to a graphics card in order to reduce power consumption and heat output. This can be done safely on most modern graphics cards, including the RX 590 Fatboy. By undervolting your RX 590 Fatboy, you can improve its efficiency and longevity without sacrificing performance.
To undervolt your RX 590 Fatboy, you will need to use a software program such as MSI Afterburner or AMD Radeon Software. Once you have installed the software, open it and navigate to the settings for your graphics card. Look for the voltage setting and reduce it by 5-10mV. You can then test the stability of your graphics card by running a benchmark or playing a game. If you experience any instability, increase the voltage by 5mV and try again.
Once you have found a stable voltage setting, you can save it to your graphics card’s profile. You can then enjoy the benefits of undervolting, such as reduced power consumption, heat output, and noise levels. You may also see a slight improvement in performance, as undervolting can reduce the amount of throttling that occurs due to high temperatures.
