10 Quick Steps to Reset Your Sentry Safe Combination

In the realm of security, Sentry Safe stands as a bastion of protection, ensuring the safekeeping of your valuables. However, even the most trusted guardians can sometimes encounter a moment of forgetfulness, leaving you grappling with a locked safe and a forgotten combination. Fear not, for this guide will serve as your compass, leading you through the uncharted territory of resetting your Sentry Safe combination, restoring access to your precious belongings.

Before embarking on this journey, it is paramount to acknowledge that the specific steps involved in resetting your combination may vary depending on the model of your Sentry Safe. Hence, it is crucial to consult the user manual that accompanied your safe or seek assistance from the manufacturer directly. With the correct instructions in hand, you can proceed with confidence, armed with the knowledge that the path to unlocking your safe lies ahead.

The process of resetting the combination on your Sentry Safe typically involves a series of steps that require precision and attention to detail. You will need to manipulate the dial with a steady hand, carefully aligning the numbers as dictated by the instructions. Along the way, you may encounter challenges, but do not be discouraged. Perseverance is the key to success in this endeavor. Remember, each step brings you closer to regaining access to your safe and the peace of mind that comes with it.

Locate the Reset Button

The reset button on a Sentry Safe is usually located on the inside of the door, behind the combination dial. To access it, you will need to first remove the faceplate of the dial. This can be done by inserting a small screwdriver into the notch on the bottom of the faceplate and prying it off.

Once the faceplate is removed, you will see the reset button. It is usually a small, red button that is located near the center of the dial. To reset the combination, simply press and hold the button for a few seconds. You will hear a click when the reset is complete.

Here is a more detailed guide to locating the reset button:

Identify the notch on the faceplate. The notch is usually located on the bottom of the faceplate, near the hinge.
Insert a small screwdriver into the notch. Be careful not to use too much force, as you could damage the faceplate.
Pry the faceplate off. Once the screwdriver is inserted into the notch, gently pry the faceplate off.
Locate the reset button. The reset button is usually a small, red button that is located near the center of the dial.

Step	Description
1	Identify the notch on the faceplate.
2	Insert a small screwdriver into the notch.
3	Pry the faceplate off.
4	Locate the reset button.

Unlock the Safe Using the Existing Combination

If you have the existing combination to your Sentry Safe, unlocking it is a straightforward process:

Step 1: Locate the Dial

The dial is located on the front of the safe. It is typically black and has numbers from 0 to 99.

Step 2: Spin the Dial Counterclockwise

Start by spinning the dial counterclockwise until the “0” is aligned with the index mark on the safe door.

Step 3: Spin the Dial Clockwise

Next, spin the dial clockwise to the first number of the combination. Stop when the number is aligned with the index mark.

Step 4: Spin the Dial Counterclockwise

Now, spin the dial counterclockwise again, past the second number of the combination. Continue spinning until the “0” is aligned with the index mark.

Step 5: Spin the Dial Clockwise

Finally, spin the dial clockwise to the second number of the combination. Stop when the number is aligned with the index mark.

Step 6: Pull Open the Door

With the combination set correctly, pull on the handle to open the safe door.

Step 7: Verify the Combination

To verify that the combination is correct, close the safe door and repeat the steps above. If the safe opens, your combination is confirmed.

Steps	Direction	Number
1	Counterclockwise	0
2	Clockwise	First number
3	Counterclockwise	Past second number
4	Clockwise	Second number

Depress the Reset Button and Set a New Combination

Locate the reset button on the back of the safe. This button may be recessed into the safe’s body and require a small tool or key to activate. Insert the tool or key into the reset hole and press the button firmly.

Once the reset button is depressed, the safe will make a clicking noise. This indicates that the safe has been reset and that the combination is now cleared.

To set a new combination, follow these steps:

Turn the dial clockwise until it stops at the first number of your new combination.
Turn the dial counterclockwise and stop at the second number of your new combination.

Troubleshooting Difficulty Resetting the Combination

If you are having trouble resetting the combination on your Sentry Safe, there are a few things you can try:

1. Make sure the dial is aligned correctly.

The dial should be aligned so that the first number is at the top and the last number is at the bottom. If the dial is not aligned correctly, the combination will not work.

2. Turn the dial slowly.

When you are turning the dial, turn it slowly and deliberately. If you turn the dial too quickly, you may skip a number and the combination will not work.

3. Check the combination carefully.

Make sure that you are entering the correct combination. If you are not sure what the combination is, check the user manual or contact Sentry Safe customer service.

4. If you have tried all of these troubleshooting tips and you are still having trouble resetting the combination, you may need to contact Sentry Safe customer service. They can provide you with further assistance and, if necessary, send a technician to reset the combination for you.

Additional Tips

If the safe has been dropped or damaged, do not attempt to reset the combination yourself. Contact Sentry Safe customer service.
If you have forgotten the combination, do not try to guess it. Contact Sentry Safe customer service.
It is a good idea to keep a record of the combination in a safe place, such as a password manager or a locked box.

Troubleshooting Tip	Additional Information
Make sure the dial is aligned correctly	The first number should be at the top and the last number should be at the bottom.
Turn the dial slowly	Turning the dial too quickly may skip a number.
Check the combination carefully	Make sure you are entering the correct combination.
Contact Sentry Safe customer service	They can provide further assistance or send a technician to reset the combination.

Unlocking the Safe Without the Combination

If you have lost or forgotten the combination to your Sentry safe, there are a few methods to open it. The easiest method is to contact SentrySafe for assistance.

Contacting SentrySafe for Assistance

To contact SentrySafe for help, you will need to provide them with the following information:

Information	Required
Model number of the safe	Yes
Serial number of the safe	Yes
Proof of purchase	No

Once you have provided SentrySafe with this information, they will be able to provide you with a code to reset the combination on your safe.

Alternative Methods for Resetting the Combination

Overriding the Combination

If you have access to the safe but have forgotten the combination, you can override the combination by performing a factory reset. To do this, you will need a special override key. The override key is a small, metal key that is typically included with the safe when you purchase it. If you have lost the override key, you can contact SentrySafe customer service to obtain a replacement.

Using a Key

If your safe has a keyhole, you can use a key to open it. The keyhole is typically located on the bottom or back of the safe. Insert the key into the keyhole and turn it to the left to open the safe.

Contacting SentrySafe Customer Service

If you have tried all of the above methods and you are still unable to open your safe, you can contact SentrySafe customer service. SentrySafe customer service can be reached by phone at 1-800-828-1438 or by email at customerservice@sentrysafe.com.

Drilling the Lock

Drilling the lock is a last resort option that should only be considered if all other methods have failed. To drill the lock, you will need a drill and a drill bit that is the same size as the lock cylinder. Drill a hole into the lock cylinder and then use a screwdriver to remove the lock cylinder. Once the lock cylinder is removed, you will be able to open the safe.

Using a Magnet

In some cases, it may be possible to open a Sentry safe using a magnet. This method is not always successful, but it is worth trying if all other methods have failed. To use a magnet, place the magnet on the side of the safe where the lock is located. Move the magnet around until you find a spot where the magnet attracts the lock. Once you have found the spot, apply pressure to the magnet and turn the dial until the safe opens.

Precautions to Take Before Resetting the Combination

Before embarking on the combination reset process, it’s imperative to exercise caution and adhere to the following precautions to avoid any complications or frustrations:

1. Ensure the Safe is Unlocked: Before attempting to reset the combination, ensure that the safe is unlocked. Attempting to reset a locked safe can lead to additional difficulties.

2. Clear the Current Combination: It’s crucial to have the current combination readily available. Without it, you won’t be able to proceed with the reset process.

3. Gather Necessary Tools: Before starting the reset, ensure you have all the necessary tools, such as the reset key or a Phillips head screwdriver, to avoid interruptions during the process.

4. Find the Reset Button: Familiarize yourself with the location of the reset button on your safe. It’s typically located inside the safe door or on the back panel.

5. Protect the Safe’s Contents: If possible, remove valuable items from the safe before resetting the combination. This ensures their safety in case of any unexpected complications during the process.

6. Have a Plan B: It’s always wise to have a backup plan in case the reset process doesn’t go as expected. Consider contacting the manufacturer or a locksmith if you encounter difficulties.

7. Understand the Reset Procedure: Familiarize yourself with the specific steps involved in resetting your safe’s combination. Refer to the user manual or online resources to ensure you follow the correct procedure for your model.

Importance of Storing the New Combination Safely

It is crucial to store the new combination safely to prevent unauthorized access to your valuables. Consider the following tips:

Tip	Explanation
Write it down and conceal it	Write the combination on a discreet piece of paper and hide it securely, such as in a sealed envelope within a separate lockbox.
Memorize it deeply	Practice opening and closing the safe repeatedly until you can remember the combination effortlessly. Avoid writing it down on your phone or other traceable devices.
Use a trusted family member	If you need to share the combination, consider informing a trusted family member or friend. Instruct them to keep it highly confidential.

Resetting the Combination on Different SentrySafe Models

SentrySafe offers a variety of combination locks, each with its unique reset procedure. Here’s a guide to resetting the combination on different SentrySafe models:

Protecting Your Documents and Valuables

SentrySafe has a wide range of products to protect your important documents and valuables. From fireproof safes to waterproof safes, SentrySafe has a solution for every need. You can rest assured that your belongings will be safe and secure with a SentrySafe product.

Unlocking Your SentrySafe Without a Combination

If you have lost the combination to your SentrySafe, there are a few things you can do to unlock it. You can contact SentrySafe customer service for assistance, or you can try to reset the combination yourself. However, it is important to note that resetting the combination on your SentrySafe will erase any existing combination.

Resetting the Combination on a SentrySafe Electronic Lock

1. Enter the current combination and press the “Enter” button.
2. Press the “Program” button.
3. Enter the new combination and press the “Enter” button.
4. Press the “Program” button again.
5. The new combination is now set.

Resetting the Combination on a SentrySafe Mechanical Lock (Model S6000-15)

1. Open the safe door and locate the reset button on the inside of the door.
2. Press the reset button and hold it down.
3. Enter the new combination.
4. Release the reset button.
5. The new combination is now set.

Resetting the Combination on a SentrySafe Mechanical Lock (Model S3000-11)

Resetting the Combination on a SentrySafe Mechanical Lock (Model SL1000)

Resetting the Combination on a SentrySafe Mechanical Lock (Model S8000-18)

Resetting the Combination on a SentrySafe Fireproof Safe

Resetting the Combination on a SentrySafe Waterproof Safe

Additional Notes on Resetting a SentrySafe Combination

When resetting the combination on your SentrySafe, be sure to choose a new combination that is easy to remember but difficult to guess. Avoid using obvious combinations, such as your birthdate or phone number. It is also important to keep your new combination confidential and not share it with anyone.

Here are some additional tips for resetting your SentrySafe combination:

If you are having trouble resetting the combination on your SentrySafe, you can contact SentrySafe customer service for assistance.
If you have lost the combination to your SentrySafe, you can use the key override to unlock it. However, it is important to note that using the key override will erase any existing combination.
You can also purchase a replacement combination lock from SentrySafe. However, this will require you to drill out the old lock and install the new lock.

Step-by-Step Guide to Reset the Combination

1. Identifying the Reset Hole

Sentry safes typically have a reset hole hidden behind a removable panel, often on the back or bottom of the safe. Locate this hole using the instructions provided in the user manual or by searching online.

2. Insert the Reset Key

Insert the reset key into the reset hole and turn it clockwise until you feel a click. This will engage the reset mechanism.

3. Opening the Safe

While holding the reset key clockwise, enter the old combination on the dial. Once the last number is entered, the door will swing open.

4. Releasing the Reset Key

Remove the key from the reset hole to disengage the reset mechanism.

5. Resetting the Combination

With the door open, enter your desired new combination on the dial. Make sure to write it down somewhere safe for future reference.

6. Closing the Safe

Close the door and turn the dial clockwise to lock it.

7. Verifying the New Combination

Re-enter the new combination on the dial to verify that it works correctly. If it doesn’t open the door, repeat steps 2 to 5.

8. Using the Reset Code

In case you forget your new combination, you can use the provided reset code to unlock the safe. Refer to the user manual for instructions on how to use the reset code.

9. Contacting Customer Service

If you are unable to reset the combination using these steps or encounter any difficulties, contact Sentry Safe’s customer service for assistance. They can provide additional troubleshooting and support.

10. Additional Tips

Use a well-lit area when resetting the combination to avoid mistakes.
Choose a combination that is easy for you to remember but not obvious to others.
Keep a record of your combination in a secure location.
Practice using your new combination a few times to become familiar with it.
If you have multiple users accessing the safe, consider using a combination that is shared among all authorized users.

Sentry Safe How To Reset Combination

Resetting the combination on a Sentry Safe is a relatively simple process that can be completed in a few minutes. Here are the steps on how to do it:

Clear the current combination by entering it into the lock and then pressing the “clear” button.
Enter the new combination you want to use into the lock and then press the “set” button.
Verify the new combination by entering it into the lock again and then pressing the “enter” button.

If you have any problems resetting the combination on your Sentry Safe, you can contact the customer service department for assistance.